diff options
Diffstat (limited to 'sysdeps/gnu/errlist.c')
| -rw-r--r-- | sysdeps/gnu/errlist.c | 1495 |
1 files changed, 0 insertions, 1495 deletions
diff --git a/sysdeps/gnu/errlist.c b/sysdeps/gnu/errlist.c deleted file mode 100644 index 77577bf3e1..0000000000 --- a/sysdeps/gnu/errlist.c +++ /dev/null @@ -1,1495 +0,0 @@ -/* This file is generated from errno.texi by errlist.awk. */ - -#include <errno.h> -#include <libintl.h> - -#ifndef ERR_REMAP -# define ERR_REMAP(n) n -#endif - -#if !defined EMIT_ERR_MAX && !defined ERRLIST_NO_COMPAT -# include <errlist-compat.h> -#endif -#ifdef ERR_MAX -# define ERRLIST_SIZE ERR_MAX + 1 -#else -# define ERR_MAX 0 -# define ERRLIST_SIZE -#endif -const char *const _sys_errlist_internal[ERRLIST_SIZE] = - { - [0] = N_("Success"), -#ifdef EPERM -/* -TRANS Only the owner of the file (or other resource) -TRANS or processes with special privileges can perform the operation. */ - [ERR_REMAP (EPERM)] = N_("Operation not permitted"), -# if EPERM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPERM -# endif -#endif -#ifdef ENOENT -/* -TRANS This is a ``file doesn't exist'' error -TRANS for ordinary files that are referenced in contexts where they are -TRANS expected to already exist. */ - [ERR_REMAP (ENOENT)] = N_("No such file or directory"), -# if ENOENT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOENT -# endif -#endif -#ifdef ESRCH -/* -TRANS No process matches the specified process ID. */ - [ERR_REMAP (ESRCH)] = N_("No such process"), -# if ESRCH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESRCH -# endif -#endif -#ifdef EINTR -/* -TRANS An asynchronous signal occurred and prevented -TRANS completion of the call. When this happens, you should try the call -TRANS again. -TRANS -TRANS You can choose to have functions resume after a signal that is handled, -TRANS rather than failing with @code{EINTR}; see @ref{Interrupted -TRANS Primitives}. */ - [ERR_REMAP (EINTR)] = N_("Interrupted system call"), -# if EINTR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINTR -# endif -#endif -#ifdef EIO -/* -TRANS Usually used for physical read or write errors. */ - [ERR_REMAP (EIO)] = N_("Input/output error"), -# if EIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EIO -# endif -#endif -#ifdef ENXIO -/* -TRANS The system tried to use the device -TRANS represented by a file you specified, and it couldn't find the device. -TRANS This can mean that the device file was installed incorrectly, or that -TRANS the physical device is missing or not correctly attached to the -TRANS computer. */ - [ERR_REMAP (ENXIO)] = N_("No such device or address"), -# if ENXIO > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENXIO -# endif -#endif -#ifdef E2BIG -/* -TRANS Used when the arguments passed to a new program -TRANS being executed with one of the @code{exec} functions (@pxref{Executing a -TRANS File}) occupy too much memory space. This condition never arises on -TRANS @gnuhurdsystems{}. */ - [ERR_REMAP (E2BIG)] = N_("Argument list too long"), -# if E2BIG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX E2BIG -# endif -#endif -#ifdef ENOEXEC -/* -TRANS Invalid executable file format. This condition is detected by the -TRANS @code{exec} functions; see @ref{Executing a File}. */ - [ERR_REMAP (ENOEXEC)] = N_("Exec format error"), -# if ENOEXEC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOEXEC -# endif -#endif -#ifdef EBADF -/* -TRANS For example, I/O on a descriptor that has been -TRANS closed or reading from a descriptor open only for writing (or vice -TRANS versa). */ - [ERR_REMAP (EBADF)] = N_("Bad file descriptor"), -# if EBADF > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBADF -# endif -#endif -#ifdef ECHILD -/* -TRANS This error happens on operations that are -TRANS supposed to manipulate child processes, when there aren't any processes -TRANS to manipulate. */ - [ERR_REMAP (ECHILD)] = N_("No child processes"), -# if ECHILD > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECHILD -# endif -#endif -#ifdef EDEADLK -/* -TRANS Allocating a system resource would have resulted in a -TRANS deadlock situation. The system does not guarantee that it will notice -TRANS all such situations. This error means you got lucky and the system -TRANS noticed; it might just hang. @xref{File Locks}, for an example. */ - [ERR_REMAP (EDEADLK)] = N_("Resource deadlock avoided"), -# if EDEADLK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDEADLK -# endif -#endif -#ifdef ENOMEM -/* -TRANS The system cannot allocate more virtual memory -TRANS because its capacity is full. */ - [ERR_REMAP (ENOMEM)] = N_("Cannot allocate memory"), -# if ENOMEM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOMEM -# endif -#endif -#ifdef EACCES -/* -TRANS The file permissions do not allow the attempted operation. */ - [ERR_REMAP (EACCES)] = N_("Permission denied"), -# if EACCES > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EACCES -# endif -#endif -#ifdef EFAULT -/* -TRANS An invalid pointer was detected. -TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. */ - [ERR_REMAP (EFAULT)] = N_("Bad address"), -# if EFAULT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EFAULT -# endif -#endif -#ifdef ENOTBLK -/* -TRANS A file that isn't a block special file was given in a situation that -TRANS requires one. For example, trying to mount an ordinary file as a file -TRANS system in Unix gives this error. */ - [ERR_REMAP (ENOTBLK)] = N_("Block device required"), -# if ENOTBLK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTBLK -# endif -#endif -#ifdef EBUSY -/* -TRANS A system resource that can't be shared is already in use. -TRANS For example, if you try to delete a file that is the root of a currently -TRANS mounted filesystem, you get this error. */ - [ERR_REMAP (EBUSY)] = N_("Device or resource busy"), -# if EBUSY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EBUSY -# endif -#endif -#ifdef EEXIST -/* -TRANS An existing file was specified in a context where it only -TRANS makes sense to specify a new file. */ - [ERR_REMAP (EEXIST)] = N_("File exists"), -# if EEXIST > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EEXIST -# endif -#endif -#ifdef EXDEV -/* -TRANS An attempt to make an improper link across file systems was detected. -TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but -TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */ - [ERR_REMAP (EXDEV)] = N_("Invalid cross-device link"), -# if EXDEV > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EXDEV -# endif -#endif -#ifdef ENODEV -/* -TRANS The wrong type of device was given to a function that expects a -TRANS particular sort of device. */ - [ERR_REMAP (ENODEV)] = N_("No such device"), -# if ENODEV > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENODEV -# endif -#endif -#ifdef ENOTDIR -/* -TRANS A file that isn't a directory was specified when a directory is required. */ - [ERR_REMAP (ENOTDIR)] = N_("Not a directory"), -# if ENOTDIR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTDIR -# endif -#endif -#ifdef EISDIR -/* -TRANS You cannot open a directory for writing, -TRANS or create or remove hard links to it. */ - [ERR_REMAP (EISDIR)] = N_("Is a directory"), -# if EISDIR > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EISDIR -# endif -#endif -#ifdef EINVAL -/* -TRANS This is used to indicate various kinds of problems -TRANS with passing the wrong argument to a library function. */ - [ERR_REMAP (EINVAL)] = N_("Invalid argument"), -# if EINVAL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINVAL -# endif -#endif -#ifdef EMFILE -/* -TRANS The current process has too many files open and can't open any more. -TRANS Duplicate descriptors do count toward this limit. -TRANS -TRANS In BSD and GNU, the number of open files is controlled by a resource -TRANS limit that can usually be increased. If you get this error, you might -TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; -TRANS @pxref{Limits on Resources}. */ - [ERR_REMAP (EMFILE)] = N_("Too many open files"), -# if EMFILE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMFILE -# endif -#endif -#ifdef ENFILE -/* -TRANS There are too many distinct file openings in the entire system. Note -TRANS that any number of linked channels count as just one file opening; see -TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. */ - [ERR_REMAP (ENFILE)] = N_("Too many open files in system"), -# if ENFILE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENFILE -# endif -#endif -#ifdef ENOTTY -/* -TRANS Inappropriate I/O control operation, such as trying to set terminal -TRANS modes on an ordinary file. */ - [ERR_REMAP (ENOTTY)] = N_("Inappropriate ioctl for device"), -# if ENOTTY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTTY -# endif -#endif -#ifdef ETXTBSY -/* -TRANS An attempt to execute a file that is currently open for writing, or -TRANS write to a file that is currently being executed. Often using a -TRANS debugger to run a program is considered having it open for writing and -TRANS will cause this error. (The name stands for ``text file busy''.) This -TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. */ - [ERR_REMAP (ETXTBSY)] = N_("Text file busy"), -# if ETXTBSY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETXTBSY -# endif -#endif -#ifdef EFBIG -/* -TRANS The size of a file would be larger than allowed by the system. */ - [ERR_REMAP (EFBIG)] = N_("File too large"), -# if EFBIG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EFBIG -# endif -#endif -#ifdef ENOSPC -/* -TRANS Write operation on a file failed because the -TRANS disk is full. */ - [ERR_REMAP (ENOSPC)] = N_("No space left on device"), -# if ENOSPC > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOSPC -# endif -#endif -#ifdef ESPIPE -/* -TRANS Invalid seek operation (such as on a pipe). */ - [ERR_REMAP (ESPIPE)] = N_("Illegal seek"), -# if ESPIPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESPIPE -# endif -#endif -#ifdef EROFS -/* -TRANS An attempt was made to modify something on a read-only file system. */ - [ERR_REMAP (EROFS)] = N_("Read-only file system"), -# if EROFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EROFS -# endif -#endif -#ifdef EMLINK -/* -TRANS The link count of a single file would become too large. -TRANS @code{rename} can cause this error if the file being renamed already has -TRANS as many links as it can take (@pxref{Renaming Files}). */ - [ERR_REMAP (EMLINK)] = N_("Too many links"), -# if EMLINK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMLINK -# endif -#endif -#ifdef EPIPE -/* -TRANS There is no process reading from the other end of a pipe. -TRANS Every library function that returns this error code also generates a -TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled -TRANS or blocked. Thus, your program will never actually see @code{EPIPE} -TRANS unless it has handled or blocked @code{SIGPIPE}. */ - [ERR_REMAP (EPIPE)] = N_("Broken pipe"), -# if EPIPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPIPE -# endif -#endif -#ifdef EDOM -/* -TRANS Used by mathematical functions when an argument value does -TRANS not fall into the domain over which the function is defined. */ - [ERR_REMAP (EDOM)] = N_("Numerical argument out of domain"), -# if EDOM > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDOM -# endif -#endif -#ifdef ERANGE -/* -TRANS Used by mathematical functions when the result value is -TRANS not representable because of overflow or underflow. */ - [ERR_REMAP (ERANGE)] = N_("Numerical result out of range"), -# if ERANGE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ERANGE -# endif -#endif -#ifdef EAGAIN -/* -TRANS The call might work if you try again -TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; -TRANS they are always the same in @theglibc{}. -TRANS -TRANS This error can happen in a few different situations: -TRANS -TRANS @itemize @bullet -TRANS @item -TRANS An operation that would block was attempted on an object that has -TRANS non-blocking mode selected. Trying the same operation again will block -TRANS until some external condition makes it possible to read, write, or -TRANS connect (whatever the operation). You can use @code{select} to find out -TRANS when the operation will be possible; @pxref{Waiting for I/O}. -TRANS -TRANS @strong{Portability Note:} In many older Unix systems, this condition -TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code -TRANS different from @code{EAGAIN}. To make your program portable, you should -TRANS check for both codes and treat them the same. -TRANS -TRANS @item -TRANS A temporary resource shortage made an operation impossible. @code{fork} -TRANS can return this error. It indicates that the shortage is expected to -TRANS pass, so your program can try the call again later and it may succeed. -TRANS It is probably a good idea to delay for a few seconds before trying it -TRANS again, to allow time for other processes to release scarce resources. -TRANS Such shortages are usually fairly serious and affect the whole system, -TRANS so usually an interactive program should report the error to the user -TRANS and return to its command loop. -TRANS @end itemize */ - [ERR_REMAP (EAGAIN)] = N_("Resource temporarily unavailable"), -# if EAGAIN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EAGAIN -# endif -#endif -#if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN -/* -TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). -TRANS The values are always the same, on every operating system. -TRANS -TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a -TRANS separate error code. */ - [ERR_REMAP (EWOULDBLOCK)] = N_("Operation would block"), -# if EWOULDBLOCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EWOULDBLOCK -# endif -#endif -#ifdef EINPROGRESS -/* -TRANS An operation that cannot complete immediately was initiated on an object -TRANS that has non-blocking mode selected. Some functions that must always -TRANS block (such as @code{connect}; @pxref{Connecting}) never return -TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that -TRANS the operation has begun and will take some time. Attempts to manipulate -TRANS the object before the call completes return @code{EALREADY}. You can -TRANS use the @code{select} function to find out when the pending operation -TRANS has completed; @pxref{Waiting for I/O}. */ - [ERR_REMAP (EINPROGRESS)] = N_("Operation now in progress"), -# if EINPROGRESS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EINPROGRESS -# endif -#endif -#ifdef EALREADY -/* -TRANS An operation is already in progress on an object that has non-blocking -TRANS mode selected. */ - [ERR_REMAP (EALREADY)] = N_("Operation already in progress"), -# if EALREADY > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EALREADY -# endif -#endif -#ifdef ENOTSOCK -/* -TRANS A file that isn't a socket was specified when a socket is required. */ - [ERR_REMAP (ENOTSOCK)] = N_("Socket operation on non-socket"), -# if ENOTSOCK > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTSOCK -# endif -#endif -#ifdef EMSGSIZE -/* -TRANS The size of a message sent on a socket was larger than the supported -TRANS maximum size. */ - [ERR_REMAP (EMSGSIZE)] = N_("Message too long"), -# if EMSGSIZE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EMSGSIZE -# endif -#endif -#ifdef EPROTOTYPE -/* -TRANS The socket type does not support the requested communications protocol. */ - [ERR_REMAP (EPROTOTYPE)] = N_("Protocol wrong type for socket"), -# if EPROTOTYPE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROTOTYPE -# endif -#endif -#ifdef ENOPROTOOPT -/* -TRANS You specified a socket option that doesn't make sense for the -TRANS particular protocol being used by the socket. @xref{Socket Options}. */ - [ERR_REMAP (ENOPROTOOPT)] = N_("Protocol not available"), -# if ENOPROTOOPT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOPROTOOPT -# endif -#endif -#ifdef EPROTONOSUPPORT -/* -TRANS The socket domain does not support the requested communications protocol -TRANS (perhaps because the requested protocol is completely invalid). -TRANS @xref{Creating a Socket}. */ - [ERR_REMAP (EPROTONOSUPPORT)] = N_("Protocol not supported"), -# if EPROTONOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPROTONOSUPPORT -# endif -#endif -#ifdef ESOCKTNOSUPPORT -/* -TRANS The socket type is not supported. */ - [ERR_REMAP (ESOCKTNOSUPPORT)] = N_("Socket type not supported"), -# if ESOCKTNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESOCKTNOSUPPORT -# endif -#endif -#ifdef EOPNOTSUPP -/* -TRANS The operation you requested is not supported. Some socket functions -TRANS don't make sense for all types of sockets, and others may not be -TRANS implemented for all communications protocols. On @gnuhurdsystems{}, this -TRANS error can happen for many calls when the object does not support the -TRANS particular operation; it is a generic indication that the server knows -TRANS nothing to do for that call. */ - [ERR_REMAP (EOPNOTSUPP)] = N_("Operation not supported"), -# if EOPNOTSUPP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EOPNOTSUPP -# endif -#endif -#ifdef EPFNOSUPPORT -/* -TRANS The socket communications protocol family you requested is not supported. */ - [ERR_REMAP (EPFNOSUPPORT)] = N_("Protocol family not supported"), -# if EPFNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EPFNOSUPPORT -# endif -#endif -#ifdef EAFNOSUPPORT -/* -TRANS The address family specified for a socket is not supported; it is -TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. */ - [ERR_REMAP (EAFNOSUPPORT)] = N_("Address family not supported by protocol"), -# if EAFNOSUPPORT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EAFNOSUPPORT -# endif -#endif -#ifdef EADDRINUSE -/* -TRANS The requested socket address is already in use. @xref{Socket Addresses}. */ - [ERR_REMAP (EADDRINUSE)] = N_("Address already in use"), -# if EADDRINUSE > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EADDRINUSE -# endif -#endif -#ifdef EADDRNOTAVAIL -/* -TRANS The requested socket address is not available; for example, you tried -TRANS to give a socket a name that doesn't match the local host name. -TRANS @xref{Socket Addresses}. */ - [ERR_REMAP (EADDRNOTAVAIL)] = N_("Cannot assign requested address"), -# if EADDRNOTAVAIL > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EADDRNOTAVAIL -# endif -#endif -#ifdef ENETDOWN -/* -TRANS A socket operation failed because the network was down. */ - [ERR_REMAP (ENETDOWN)] = N_("Network is down"), -# if ENETDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETDOWN -# endif -#endif -#ifdef ENETUNREACH -/* -TRANS A socket operation failed because the subnet containing the remote host -TRANS was unreachable. */ - [ERR_REMAP (ENETUNREACH)] = N_("Network is unreachable"), -# if ENETUNREACH > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETUNREACH -# endif -#endif -#ifdef ENETRESET -/* -TRANS A network connection was reset because the remote host crashed. */ - [ERR_REMAP (ENETRESET)] = N_("Network dropped connection on reset"), -# if ENETRESET > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENETRESET -# endif -#endif -#ifdef ECONNABORTED -/* -TRANS A network connection was aborted locally. */ - [ERR_REMAP (ECONNABORTED)] = N_("Software caused connection abort"), -# if ECONNABORTED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNABORTED -# endif -#endif -#ifdef ECONNRESET -/* -TRANS A network connection was closed for reasons outside the control of the -TRANS local host, such as by the remote machine rebooting or an unrecoverable -TRANS protocol violation. */ - [ERR_REMAP (ECONNRESET)] = N_("Connection reset by peer"), -# if ECONNRESET > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNRESET -# endif -#endif -#ifdef ENOBUFS -/* -TRANS The kernel's buffers for I/O operations are all in use. In GNU, this -TRANS error is always synonymous with @code{ENOMEM}; you may get one or the -TRANS other from network operations. */ - [ERR_REMAP (ENOBUFS)] = N_("No buffer space available"), -# if ENOBUFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOBUFS -# endif -#endif -#ifdef EISCONN -/* -TRANS You tried to connect a socket that is already connected. -TRANS @xref{Connecting}. */ - [ERR_REMAP (EISCONN)] = N_("Transport endpoint is already connected"), -# if EISCONN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EISCONN -# endif -#endif -#ifdef ENOTCONN -/* -TRANS The socket is not connected to anything. You get this error when you -TRANS try to transmit data over a socket, without first specifying a -TRANS destination for the data. For a connectionless socket (for datagram -TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */ - [ERR_REMAP (ENOTCONN)] = N_("Transport endpoint is not connected"), -# if ENOTCONN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENOTCONN -# endif -#endif -#ifdef EDESTADDRREQ -/* -TRANS No default destination address was set for the socket. You get this -TRANS error when you try to transmit data over a connectionless socket, -TRANS without first specifying a destination for the data with @code{connect}. */ - [ERR_REMAP (EDESTADDRREQ)] = N_("Destination address required"), -# if EDESTADDRREQ > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EDESTADDRREQ -# endif -#endif -#ifdef ESHUTDOWN -/* -TRANS The socket has already been shut down. */ - [ERR_REMAP (ESHUTDOWN)] = N_("Cannot send after transport endpoint shutdown"), -# if ESHUTDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ESHUTDOWN -# endif -#endif -#ifdef ETOOMANYREFS -/* */ - [ERR_REMAP (ETOOMANYREFS)] = N_("Too many references: cannot splice"), -# if ETOOMANYREFS > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETOOMANYREFS -# endif -#endif -#ifdef ETIMEDOUT -/* -TRANS A socket operation with a specified timeout received no response during -TRANS the timeout period. */ - [ERR_REMAP (ETIMEDOUT)] = N_("Connection timed out"), -# if ETIMEDOUT > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ETIMEDOUT -# endif -#endif -#ifdef ECONNREFUSED -/* -TRANS A remote host refused to allow the network connection (typically because -TRANS it is not running the requested service). */ - [ERR_REMAP (ECONNREFUSED)] = N_("Connection refused"), -# if ECONNREFUSED > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ECONNREFUSED -# endif -#endif -#ifdef ELOOP -/* -TRANS Too many levels of symbolic links were encountered in looking up a file name. -TRANS This often indicates a cycle of symbolic links. */ - [ERR_REMAP (ELOOP)] = N_("Too many levels of symbolic links"), -# if ELOOP > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ELOOP -# endif -#endif -#ifdef ENAMETOOLONG -/* -TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for -TRANS Files}) or host name too long (in @code{gethostname} or -TRANS @code{sethostname}; @pxref{Host Identification}). */ - [ERR_REMAP (ENAMETOOLONG)] = N_("File name too long"), -# if ENAMETOOLONG > ERR_MAX -# undef ERR_MAX -# define ERR_MAX ENAMETOOLONG -# endif -#endif -#ifdef EHOSTDOWN -/* -TRANS The remote host for a requested network connection is down. */ - [ERR_REMAP (EHOSTDOWN)] = N_("Host is down"), -# if EHOSTDOWN > ERR_MAX -# undef ERR_MAX -# define ERR_MAX EHOSTDOWN -# endif -#endif -#ifdef EHOSTUNREACH -/* -TRANS The remote host for a requested network connection is not reachable. */ - [ERR_REMAP (EHOSTUNREACH)] = N_("No route to host"), |