aboutsummaryrefslogtreecommitdiff
path: root/stdlib/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2014-05-16Use existing makefile variables for dependencies on glibc libraries.Joseph Myers1-12/+6
glibc's Makeconfig defines some variables such as $(libm) and $(libdl) for linking with libraries built by glibc, and nptl/Makeconfig (included by the toplevel Makeconfig) defines others such as $(shared-thread-library). In some places glibc's Makefiles use those variables when linking against the relevant libraries, but in other places they hardcode the location of the libraries in the build tree. This patch cleans up various places to use the variables that already exist (in the case of libm, replacing several duplicate definitions of a $(link-libm) variable in subdirectory Makefiles). (It's not necessarily exactly equivalent to what the existing code does - in particular, $(shared-thread-library) includes libpthread_nonshared, but is replacing places that just referred to libpthread.so. But I think that change is desirable on the general principle of linking things as close as possible to the way in which they would be linked with an installed library, unless there is a clear reason not to do so.) To support running tests with an installed copy of glibc without needing the full build tree from when that copy was built, I think it will be useful to use such variables more generally and systematically - every time the rules for building a test refer to some file from the build tree that's also installed by glibc, use a makefile variable so that the installed-testing case can point those variables to installed copies of the files. This patch just deals with straightforward cases where such variables already exist. It's quite possible some uses of $(shared-thread-library) should actually be a new $(thread-library) variable that's set appropriately in the --disable-shared case, if those uses would in fact work without shared libraries. I didn't change the status quo that those cases hardcode use of a shared library whether or not it's actually needed (but other uses such as $(libm) and $(libdl) would now get the static library if the shared library isn't built, when some previously hardcoded use of the shared library - if they actually need shared libraries, the test itself needs an enable-shared conditional anyway). Tested x86_64. * benchtests/Makefile ($(addprefix $(objpfx)bench-,$(bench-math))): Depend on $(libm), not $(common-objpfx)math/libm.so. ($(addprefix $(objpfx)bench-,$(bench-pthread))): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * elf/Makefile ($(objpfx)noload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. ($(objpfx)tst-audit8): Depend on $(libm), not $(common-objpfx)math/libm.so. * malloc/Makefile ($(objpfx)libmemusage.so): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * math/Makefile ($(addprefix $(objpfx),$(filter-out $(tests-static),$(tests)))): Depend on $(libm), not $(objpfx)libm.so. Do not condition on [$(build-shared) = yes]. ($(objpfx)test-fenv-tls): Depend on $(shared-thread-library), not $(common-objpfx)nptl/libpthread.so. * misc/Makefile ($(objpfx)tst-tsearch): Depend on $(libm), not $(common-objpfx)math/libm.so$(libm.so-version) or $(common-objpfx)math/libm.a depending on [$(build-shared) = yes]. * nptl/Makefile ($(objpfx)tst-unload): Depend on $(libdl), not $(common-objpfx)dlfcn/libdl.so. * setjmp/Makefile (link-libm): Remove variable. ($(objpfx)tst-setjmp-fp): Depend on $(libm), not $(link-libm). * stdio-common/Makefile (link-libm): Remove variable. ($(objpfx)tst-printf-round): Depend on $(libm), not $(link-libm). * stdlib/Makefile (link-libm): Remove variable. ($(objpfx)bug-getcontext): Depend on $(libm), not $(link-libm). ($(objpfx)tst-strtod-round): Likewise. ($(objpfx)tst-tininess): Likewise. ($(objpfx)tst-strtod-underflow): Likewise. ($(objpfx)tst-strtod6): Likewise. ($(objpfx)tst-tls-atexit): Depend on $(shared-thread-library) and $(libdl), not $(common-objpfx)nptl/libpthread.so and $(common-objpfx)dlfcn/libdl.so.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers1-7/+7
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-2/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers1-2/+4
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae1-1/+1
2013-08-26Fix dependencies for stdlib/tst-tls-atexitAndreas Schwab1-1/+1
2013-05-31Link extra-libs consistently with libc and ld.so.Joseph Myers1-1/+1
2013-04-05More tests for external charater sequences representing NaNs.Thomas Schwinge1-0/+1
2013-02-18C++11 thread_local destructors supportSiddhesh Poyarekar1-2/+10
This feature is specifically for the C++ compiler to offload calling thread_local object destructors on thread program exit, to glibc. This is to overcome the possible complication of destructors of thread_local objects getting called after the DSO in which they're defined is unloaded by the dynamic linker. The DSO is marked as 'unloadable' if it has a constructed thread_local object and marked as 'unloadable' again when all the constructed thread_local objects defined in it are destroyed.
2013-02-13Install stdlib-bsearch.h headerOndrej Bilka1-1/+2
2013-01-11Add --enable-hardcoded-path-in-tests configure optionH.J. Lu1-1/+1
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers1-1/+1
2012-11-02Compile x86 rtld with -mno-sse -mno-mmxH.J. Lu1-1/+1
2012-10-30Fix strtod handling of underflow (bug 14047).Joseph Myers1-1/+4
2012-10-24Define and use $(run-built-tests).Joseph Myers1-1/+1
2012-09-25Set "fail on error" mode directly in testsuite shell scriptsDmitry V. Levin1-2/+2
2012-09-12Make strtod respect the rounding mode (bug 14518).Joseph Myers1-0/+1
2012-08-27Fix strtod rounding (bug 3479).Joseph Myers1-1/+1
2012-08-27Fix strtod integer/buffer overflow (bug 14459).Joseph Myers1-1/+1
2012-08-17Clean up definition of _LIBC_REENTRANT and _IO_MTSAFE_IO.Roland McGrath1-4/+2
2012-07-25Rename __secure_getenv to secure_getenvFlorian Weimer1-1/+3
2012-05-02Fix test-suite failues with -Wl,--as-neededAllan McRae1-0/+1
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-03-07Remove distribute variable from MakefilesUlrich Drepper1-3/+0
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert1-3/+2
2012-01-16Fix locking problem in fmtmsgUlrich Drepper1-2/+3
2011-04-17Fix FPU context handling in getcontext on x86-64.Ulrich Drepper1-2/+9
fnstenv on x86-64 seems to clear the state. Work around.
2009-12-24Remove tst-sigcontext test.Ulrich Drepper1-1/+1
It's bogus in many places.
2009-12-24Additional setcontext(), etc. conformance tests.Maciej W. Rozycki1-1/+2
2009-03-08* stdlib/Makefile (routines): Add quick_exit, at_quick_exit, andUlrich Drepper1-2/+3
cxa_at_quick_exit. (static-only-routines): Add at_quick_exit. * stdlib/Versions: Export quick_exit and __cxa_at_quick_exit for GLIBC_2.10. * stdlib/quick_exit.c: New file. * stdlib/at_quick_exit.c: New file. * stdlib/cxa_at_quick_exit.c: New file. * stdlib/cxa_atexit.c (__cxa_atexit): Move body to new function. Call it appropriately. (__internal_atexit): New function. (__new_exitfn): Now takes parameter to point to the list to use. * stdlib/cxa_finalize.c: Remove quick_exit handlers, don't call them. * stdlib/exit.c (__run_exit_handlers): New function. Split from... (exit): ...here. Just call __run_exit_handlers appropriately. * stdlib/exit.h: Declare __quick_exit_funcs, __run_exit_handlers, __internal_atexit, __cxa_at_quick_exit. Adjust __new_exitfn. * stdlib/on_exit.c: Adjust call to __new_exitfn. * stdlib/stdlib.h: Declare at_quick_exit and quick_exit.
2008-12-02* stdlib/Makefile (tests): Add tst-unsetenv1.Ulrich Drepper1-1/+1
* stdlib/tst-unsetenv1.c: New file.
2008-03-08[BZ #5774]Ulrich Drepper1-1/+1
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Consume closing brace on NAN(...) sequence. * stdlib/Makefile (tests): Add tst-strtod6. * stdlib/tst-strtod6.c: New file. * inet/inet6_opt.c (inet6_opt_init): Check extlen for overflow.
2008-03-08* stdlib/Makefile (aux): Add tens_in_limb.Ulrich Drepper1-1/+1
* stdlib/strtod_l.c: Move _tens_in_limb definition to... * stdlib/tens_in_limb.c: ...here. New file.
2008-01-09* sysdeps/unix/sysv/linux/i386/makecontext.S (__makecontext): AvoidUlrich Drepper1-2/+4
clobbering memory at or above uc_stack.ss_sp + uc_stack.ss_size. * stdlib/Makefile: Add rules to build and run tst-makecontext2. * stdlib/tst-makecontext2.c: New test.
2007-10-052007-10-04 Jakub JelinekUlrich Drepper1-1/+1
* stdlib/msort.c: Include stdint.h. (struct msort_param): New type. (msort_with_tmp): Use struct msort_param pointer for unchanging parameters. Add optimized handling for several common sizes and indirect sorting mode. (qsort): Adjust msort_with_tmp callers. For big S use indirect sorting. Suggested by Belazougui Djamel . * stdlib/Makefile (tests): Add tst-qsort2. * stdlib/tst-qsort2.c: New test.
2007-08-03* stdlib/strtod_l.c (____STRTOF_INTERNAL): Properly handle -0.Ulrich Drepper1-1/+2
* stdlib/Makefile (tests): Add tst-strtod5. (tst-strtod5-ENV): New. * stdlib/tst-strtod5.c: New file.
2007-01-11[BZ #2510, BZ #2830, BZ #3137, BZ #3313, BZ #3426, BZ #3465, BZ #3480, BZ ↵Ulrich Drepper1-4/+0
#3483, BZ #3493, BZ #3514, BZ #3515, BZ #3664, BZ #3673, BZ #3674] 2007-01-11 Jakub Jelinek <jakub@redhat.com> * sysdeps/i386/soft-fp/sfp-machine.h: Remove. * sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise. 2007-01-10 Ulrich Drepper <drepper@redhat.com> * io/fts.c: Make sure fts_cur is always valid after return from fts_read. Patch by Miloslav Trmac <mitr@redhat.com>. 2006-10-27 Richard Sandiford <richard@codesourcery.com> * elf/elf.h (R_MIPS_GLOB_DAT): Define. (R_MIPS_NUM): Bump by 1. 2007-01-03 Jakub Jelinek <jakub@redhat.com> * posix/execvp.c: Include alloca.h. (allocate_scripts_argv): Renamed to... (scripts_argv): ... this. Don't allocate buffer here nor count arguments. (execvp): Use alloca if possible. * posix/Makefile: Add rules to build and run tst-vfork3 test. * posix/tst-vfork3.c: New test. * stdlib/Makefile (tst-strtod3-ENV): Define. 2007-01-02 Ulrich Drepper <drepper@redhat.com> * posix/getconf.c: Update copyright year. * nss/getent.c: Likewise. * iconv/iconvconfig.c: Likewise. * iconv/iconv_prog.c: Likewise. * elf/ldconfig.c: Likewise. * catgets/gencat.c: Likewise. * csu/version.c: Likewise. * elf/ldd.bash.in: Likewise. * elf/sprof.c (print_version): Likewise. * locale/programs/locale.c: Likewise. * locale/programs/localedef.c: Likewise. * nscd/nscd.c (print_version): Likewise. * debug/xtrace.sh: Likewise. * malloc/memusage.sh: Likewise. * malloc/mtrace.pl: Likewise. * debug/catchsegv.sh: Likewise. 2006-12-24 Ulrich Drepper <drepper@redhat.com> * malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment attempts. 2006-12-23 Ulrich Drepper <drepper@redhat.com> * posix/wordexp.c: Remove some unnecessary tests. 2006-12-20 SUGIOKA Toshinobu <sugioka@itonet.co.jp> * sysdeps/unix/sysv/linux/sh/bits/shm.h: New file. * nss/getXXbyYY_r.c: Include atomic.h. (INTERNAL (REENTRANT_NAME)): Write startp after start_fct, add atomic_write_barrier () in between. 2006-11-28 Jakub Jelinek <jakub@redhat.com> * elf/dl-support.c: Include dl-procinfo.h. * sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4, PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS, PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X): Define. (_dl_string_platform): Use PPC_PLATFORM_* macros instead of hardcoded constants. * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use PPC_PLATFORM_* macros for array designators. 2006-11-11 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap names to the beginning. (_dl_powerpc_platforms): Add "power6x". * sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease. (HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP. (_DL_PLATFORMS_COUNT): Increase. (_dl_string_platform): Handle power6x case. * sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP, PPC_FEATURE_POWER6_EXT): Define. (PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment. [-2^31 .. 2^31) range. * sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME. * sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags): Handle relatime mount option. 2006-12-13 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include kernel-features.h. 2006-12-11 Ulrich Drepper <drepper@redhat.com> * stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand separators also if no non-zero digits found. * stdlib/Makefile (tests): Add tst-strtod3. [BZ #3664] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize empty parsed strings. * stdlib/Makefile (tests): Add tst-strtod2. * stdlib/tst-strtod2.c: New file. [BZ #3673] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit computation. * stdlib/Makefile (tests): Add tst-atof2. * stdlib/tst-atof2.c: New file. [BZ #3674] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value correctly if removing trailing zero of hex-float. * stdlib/Makefile (tests): Add tst-atof1. * stdlib/tst-atof1.c: New file. * misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest. Start searching for next comma at p rather than rest. * misc/Makefile (tests): Add tst-mntent2. * misc/tst-mntent2.c: New test. 2006-12-08 Ulrich Drepper <drepper@redhat.com> * malloc/memusage.c: Handle realloc with new size of zero and non-NULL pointer correctly. (me): Really write first record twice. (struct entry): Make format bi-arch safe. (dest): Write out more realloc statistics. * malloc/memusagestat.c (struct entry):