| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Bug 21047 reports that the clang assembler disallows the ARM
implementations of _FPU_GETCW and _FPU_SETCW.
These are deliberately written the way they are, using generic
coprocessor instructions (from the days when VFP was just one possible
coprocessor for ARM) that have the right encodings, to handle the case
of the instructions being used runtime-conditionally inside glibc,
where use of these macros is not meant to result in either the
assembler requiring VFP to be enabled at assembly time or in it
marking the object as using VFP. However, more recent ARM ARM
versions have restricted the definitions of the coprocessor
instructions and reportedly the clang assembler follows that in
disallowing those names for VFP instructions.
In the non-__SOFTFP__ case - which in fact is the only case where
these macro definitions can be used outside the build of glibc itself
- using VFP instruction names is of course fine, since we know that
VFP is enabled for that compilation. Thus, this patch uses the
current VFP names for these instructions in that case to improve
compatibility for this header file.
Tested for hard-float and soft-float builds of glibc, including that
installed stripped shared libraries are unchanged by the patch.
[BZ #21047]
* sysdeps/arm/fpu_control.h [!__SOFTFP__] (_FPU_GETCW): Use VFP
name for instruction.
[!__SOFTFP__] (_FPU_SETCW): Likewise.
|
|
This replaces the pthread rwlock with a new implementation that uses a
more scalable algorithm (primarily through not using a critical section
anymore to make state changes). The fast path for rdlock acquisition and
release is now basically a single atomic read-modify write or CAS and a few
branches. See nptl/pthread_rwlock_common.c for details.
* nptl/DESIGN-rwlock.txt: Remove.
* nptl/lowlevelrwlock.sym: Remove.
* nptl/Makefile: Add new tests.
* nptl/pthread_rwlock_common.c: New file. Contains the new rwlock.
* nptl/pthreadP.h (PTHREAD_RWLOCK_PREFER_READER_P): Remove.
(PTHREAD_RWLOCK_WRPHASE, PTHREAD_RWLOCK_WRLOCKED,
PTHREAD_RWLOCK_RWAITING, PTHREAD_RWLOCK_READER_SHIFT,
PTHREAD_RWLOCK_READER_OVERFLOW, PTHREAD_RWLOCK_WRHANDOVER,
PTHREAD_RWLOCK_FUTEX_USED): New.
* nptl/pthread_rwlock_init.c (__pthread_rwlock_init): Adapt to new
implementation.
* nptl/pthread_rwlock_rdlock.c (__pthread_rwlock_rdlock_slow): Remove.
(__pthread_rwlock_rdlock): Adapt.
* nptl/pthread_rwlock_timedrdlock.c
(pthread_rwlock_timedrdlock): Adapt.
* nptl/pthread_rwlock_timedwrlock.c
(pthread_rwlock_timedwrlock): Adapt.
* nptl/pthread_rwlock_trywrlock.c (pthread_rwlock_trywrlock): Adapt.
* nptl/pthread_rwlock_tryrdlock.c (pthread_rwlock_tryrdlock): Adapt.
* nptl/pthread_rwlock_unlock.c (pthread_rwlock_unlock): Adapt.
* nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock_slow): Remove.
(__pthread_rwlock_wrlock): Adapt.
* nptl/tst-rwlock10.c: Adapt.
* nptl/tst-rwlock11.c: Adapt.
* nptl/tst-rwlock17.c: New file.
* nptl/tst-rwlock18.c: New file.
* nptl/tst-rwlock19.c: New file.
* nptl/tst-rwlock2b.c: New file.
* nptl/tst-rwlock8.c: Adapt.
* nptl/tst-rwlock9.c: Adapt.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/hppa/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/sparc/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h
(pthread_rwlock_t): Adapt.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h
(pthread_rwlock_t): Adapt.
* sysdeps/x86/bits/pthreadtypes.h (pthread_rwlock_t): Adapt.
* nptl/nptl-printers.py (): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-rwlock-printers.py: Adapt.
* nptl/test-rwlockattr-printers.c: Adapt.
* nptl/test-rwlockattr-printers.py: Adapt.
|
|
|
|
This is a new implementation for condition variables, required
after http://austingroupbugs.net/view.php?id=609 to fix bug 13165. In
essence, we need to be stricter in which waiters a signal or broadcast
is required to wake up; this couldn't be solved using the old algorithm.
ISO C++ made a similar clarification, so this also fixes a bug in
current libstdc++, for example.
We can't use the old algorithm anymore because futexes do not guarantee
to wake in FIFO order. Thus, when we wake, we can't simply let any
waiter grab a signal, but we need to ensure that one of the waiters
happening before the signal is woken up. This is something the previous
algorithm violated (see bug 13165).
There's another issue specific to condvars: ABA issues on the underlying
futexes. Unlike mutexes that have just three states, or semaphores that
have no tokens or a limited number of them, the state of a condvar is
the *order* of the waiters. A waiter on a semaphore can grab a token
whenever one is available; a condvar waiter must only consume a signal
if it is eligible to do so as determined by the relative order of the
waiter and the signal.
Therefore, this new algorithm maintains two groups of waiters: Those
eligible to consume signals (G1), and those that have to wait until
previous waiters have consumed signals (G2). Once G1 is empty, G2
becomes the new G1. 64b counters are used to avoid ABA issues.
This condvar doesn't yet use a requeue optimization (ie, on a broadcast,
waking just one thread and requeueing all others on the futex of the
mutex supplied by the program). I don't think doing the requeue is
necessarily the right approach (but I haven't done real measurements
yet):
* If a program expects to wake many threads at the same time and make
that scalable, a condvar isn't great anyway because of how it requires
waiters to operate mutually exclusive (due to the mutex usage). Thus, a
thundering herd problem is a scalability problem with or without the
optimization. Using something like a semaphore might be more
appropriate in such a case.
* The scalability problem is actually at the mutex side; the condvar
could help (and it tries to with the requeue optimization), but it
should be the mutex who decides how that is done, and whether it is done
at all.
* Forcing all but one waiter into the kernel-side wait queue of the
mutex prevents/avoids the use of lock elision on the mutex. Thus, it
prevents the only cure against the underlying scalability problem
inherent to condvars.
* If condvars use short critical sections (ie, hold the mutex just to
check a binary flag or such), which they should do ideally, then forcing
all those waiter to proceed serially with kernel-based hand-off (ie,
futex ops in the mutex' contended state, via the futex wait queues) will
be less efficient than just letting a scalable mutex implementation take
care of it. Our current mutex impl doesn't employ spinning at all, but
if critical sections are short, spinning can be much better.
* Doing the requeue stuff requires all waiters to always drive the mutex
into the contended state. This leads to each waiter having to call
futex_wake after lock release, even if this wouldn't be necessary.
[BZ #13165]
* nptl/pthread_cond_broadcast.c (__pthread_cond_broadcast): Rewrite to
use new algorithm.
* nptl/pthread_cond_destroy.c (__pthread_cond_destroy): Likewise.
* nptl/pthread_cond_init.c (__pthread_cond_init): Likewise.
* nptl/pthread_cond_signal.c (__pthread_cond_signal): Likewise.
* nptl/pthread_cond_wait.c (__pthread_cond_wait): Likewise.
(__pthread_cond_timedwait): Move here from pthread_cond_timedwait.c.
(__condvar_confirm_wakeup, __condvar_cancel_waiting,
__condvar_cleanup_waiting, __condvar_dec_grefs,
__pthread_cond_wait_common): New.
(__condvar_cleanup): Remove.
* npt/pthread_condattr_getclock.c (pthread_condattr_getclock): Adapt.
* npt/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* npt/pthread_condattr_getpshared.c (pthread_condattr_getpshared):
Likewise.
* npt/pthread_condattr_init.c (pthread_condattr_init): Likewise.
* nptl/tst-cond1.c: Add comment.
* nptl/tst-cond20.c (do_test): Adapt.
* nptl/tst-cond22.c (do_test): Likewise.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h (pthread_cond_t): Adapt
structure.
* sysdeps/arm/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h (pthread_cond_t):
Likewise.
* sysdeps/x86/bits/pthreadtypes.h (pthread_cond_t): Likewise.
* sysdeps/nptl/internaltypes.h (COND_NWAITERS_SHIFT): Remove.
(COND_CLOCK_BITS): Adapt.
* sysdeps/nptl/pthread.h (PTHREAD_COND_INITIALIZER): Adapt.
* nptl/pthreadP.h (__PTHREAD_COND_CLOCK_MONOTONIC_MASK,
__PTHREAD_COND_SHARED_MASK): New.
* nptl/nptl-printers.py (CLOCK_IDS): Remove.
(ConditionVariablePrinter, ConditionVariableAttributesPrinter): Adapt.
* nptl/nptl_lock_constants.pysym: Adapt.
* nptl/test-cond-printers.py: Adapt.
* sysdeps/unix/sysv/linux/hppa/internaltypes.h (cond_compat_clear,
cond_compat_check_and_clear): Adapt.
* sysdeps/unix/sysv/linux/hppa/pthread_cond_timedwait.c: Remove file ...
* sysdeps/unix/sysv/linux/hppa/pthread_cond_wait.c
(__pthread_cond_timedwait): ... and move here.
* nptl/DESIGN-condvar.txt: Remove file.
* nptl/lowlevelcond.sym: Likewise.
* nptl/pthread_cond_timedwait.c: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i586/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/i386/i686/pthread_cond_wait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_broadcast.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_signal.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S: Likewise.
|
|
explicit_bzero(s, n) is the same as memset(s, 0, n), except that the
compiler is not allowed to delete a call to explicit_bzero even if the
memory pointed to by 's' is dead after the call. Right now, this effect
is achieved externally by having explicit_bzero be a function whose
semantics are unknown to the compiler, and internally, with a no-op
asm statement that clobbers memory. This does mean that small
explicit_bzero operations cannot be expanded inline as small memset
operations can, but on the other hand, small memset operations do get
deleted by the compiler. Hopefully full compiler support for
explicit_bzero will happen relatively soon.
There are two new tests: test-explicit_bzero.c verifies the
visible semantics in the same way as the existing test-bzero.c,
and tst-xbzero-opt.c verifies the not-being-optimized-out property.
The latter is conceptually based on a test written by Matthew Dempsky
for the OpenBSD regression suite.
The crypt() implementation has an immediate use for this new feature.
We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero
by running all of libcrypt's calls through the fortified variant,
__explicit_bzero_chk, which is in the impl namespace anyway. Currently
I'm not aware of anything in libc proper that needs this, but the
glue is all in place if it does become necessary. The legacy DES
implementation wasn't bothering to clear its buffers, so I added that,
mostly for consistency's sake.
* string/explicit_bzero.c: New routine.
* string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests.
* string/Makefile (routines, strop-tests, tests): Add them.
* string/test-memset.c: Add ifdeffage for testing explicit_bzero.
* string/string.h [__USE_MISC]: Declare explicit_bzero.
* debug/explicit_bzero_chk.c: New routine.
* debug/Makefile (routines): Add it.
* debug/tst-chk1.c: Test fortification of explicit_bzero.
* string/bits/string3.h: Fortify explicit_bzero.
* manual/string.texi: Document explicit_bzero.
* NEWS: Mention addition of explicit_bzero.
* crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate
data before returning, using explicit_bzero.
* crypt/md5-crypt.c (__md5_crypt_r): Likewise.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* include/string.h: Redirect internal uses of explicit_bzero
to __explicit_bzero_chk[_internal].
* string/Versions [GLIBC_2.25]: Add explicit_bzero.
* debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk.
* sysdeps/arm/nacl/libc.abilist
* sysdeps/unix/sysv/linux/aarch64/libc.abilist
* sysdeps/unix/sysv/linux/alpha/libc.abilist
* sysdeps/unix/sysv/linux/arm/libc.abilist
* sysdeps/unix/sysv/linux/hppa/libc.abilist
* sysdeps/unix/sysv/linux/i386/libc.abilist
* sysdeps/unix/sysv/linux/ia64/libc.abilist
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist
* sysdeps/unix/sysv/linux/microblaze/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist
* sysdeps/unix/sysv/linux/nios2/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist
* sysdeps/unix/sysv/linux/sh/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist:
Add entries for explicit_bzero and __explicit_bzero_chk.
|
|
|
|
Continuing the refactoring of bits/mathdef.h, this patch moves the
FP_FAST_* definitions into a new bits/fp-fast.h header. Currently
this is only for FP_FAST_FMA*, but in future it would be the
appropriate place for the FP_FAST_* macros from TS 18661-1 as well.
The generic bits/mathdef.h header defines these macros based on
whether the compiler defines __FP_FAST_*. Most architecture-specific
headers, however, fail to do so, meaning that if the architecture (or
some particular processors) does in fact have fused operations, and
GCC knows to use them inline, the FP_FAST_* macros will still not be
defined.
By refactoring, this patch causes the generic version (based on
__FP_FAST_*) to be used in more cases, and so the macro definitions to
be more accurate. Architectures that already defined some or all of
these macros other than based on the predefines have their own
versions of fp-fast.h, which are arranged so they define FP_FAST_* if
either the architecture-specific conditions are true or __FP_FAST_*
are defined.
After this refactoring, various bits/mathdef.h headers for
architectures with long double = double are semantically identical to
the generic version. The patch removes those headers that are
redundant. (In fact two of the four removed were already redundant
before this patch because they did use __FP_FAST_*.)
Tested for x86_64 and x86, and compilation-only with
build-many-glibcs.py.
* bits/fp-fast.h: New file.
* sysdeps/aarch64/bits/fp-fast.h: Likewise.
* sysdeps/powerpc/bits/fp-fast.h: Likewise.
* math/Makefile (headers): Add bits/fp-fast.h.
* math/math.h: Include <bits/fp-fast.h>.
* bits/mathdef.h (FP_FAST_FMA): Remove.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/arm/bits/mathdef.h: Remove file.
* sysdeps/hppa/fpu/bits/mathdef.h: Likewise.
* sysdeps/sh/sh4/bits/mathdef.h: Likewise.
* sysdeps/tile/bits/mathdef.h: Likewise.
|
|
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
|
|
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
|
|
|
|
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
|
|
ISO/IEC TS 18661-1 adds several functions in the strfrom family to stdlib.
This patch adds strfromd, strfromf, and strfroml. This is being done in
preparation for the new floating-point type, float128. The added functions
convert a floating-point value into a string, with configurable format.
|
|
This patch makes ARM sqrt and sqrtf use the VSQRT VFP square root
instruction when available, instead of much larger generic code for
computing square roots.
Now, GCC will normally inline sqrt calls except for negative arguments
where errno needs to be set, and because the benchtests fail to use
-fno-builtin that means no significant difference in benchmark results
for sqrt (note, however, there are lots of __ieee754_sqrt calls
internally in libm, which are *not* inlined - although some
architectures define __ieee754_sqrt in their math_private.h for that
purpose, ARM doesn't - so improving out-of-line sqrt performance is
still relevant to those other functions, if not for most ordinary
direct users of sqrt). With the benchtests changed to use
-fno-builtin for sqrt tests, typical performance results before the
change are ("max" is wildly varying in any case):
"duration": 9.88358e+09,
"iterations": 4.8783e+07,
"max": 457.764,
"min": 183.105,
"mean": 202.603
and after it are:
"duration": 9.45663e+09,
"iterations": 2.24385e+08,
"max": 274.659,
"min": 30.517,
"mean": 42.1447
Tested for ARM (hard-float and soft-float).
[BZ #20660]
* sysdeps/arm/e_sqrt.c: New file.
* sysdeps/arm/e_sqrtf.c: Likewise.
|
|
This adds a test to ensure that the problems fixed in the last several
patches do not recur. Each directory checks the headers that it
installs for two properties: first, each header must be compilable in
isolation, as both C and C++, under a representative combination of
language and library conformance levels; second, there is a blacklist
of identifiers that may not appear in any installed header, currently
consisting of the legacy BSD typedefs. (There is an exemption for the
headers that define those typedefs, and for the RPC headers. It may be
necessary to make this more sophisticated if we add more stuff to the
blacklist in the future.)
In order for this test to work correctly, every wrapper header
that actually defines something must guard those definitions with
#ifndef _ISOMAC. This is the existing mechanism used by the conform/
tests to tell wrapper headers not to define anything that the public
header wouldn't, and not to use anything from libc-symbols.h. conform/
only cares for headers that we need to check for standards conformance,
whereas this test applies to *every* header. (Headers in include/ that
are either installed directly, or are internal-use-only and do *not*
correspond to any installed header, are not affected.)
* scripts/check-installed-headers.sh: New script.
* Rules: In each directory that defines header files to be installed,
run check-installed-headers.sh on them as a special test.
* Makefile: Likewise for the headers installed at top level.
* include/aliases.h, include/alloca.h, include/argz.h
* include/arpa/nameser.h, include/arpa/nameser_compat.h
* include/elf.h, include/envz.h, include/err.h
* include/execinfo.h, include/fpu_control.h, include/getopt.h
* include/gshadow.h, include/ifaddrs.h, include/libintl.h
* include/link.h, include/malloc.h, include/mcheck.h
* include/mntent.h, include/netinet/ether.h
* include/nss.h, include/obstack.h, include/printf.h
* include/pty.h, include/resolv.h, include/rpc/auth.h
* include/rpc/auth_des.h, include/rpc/auth_unix.h
* include/rpc/clnt.h, include/rpc/des_crypt.h
* include/rpc/key_prot.h, include/rpc/netdb.h
* include/rpc/pmap_clnt.h, include/rpc/pmap_prot.h
* include/rpc/pmap_rmt.h, include/rpc/rpc.h
* include/rpc/rpc_msg.h, include/rpc/svc.h
* include/rpc/svc_auth.h, include/rpc/xdr.h
* include/rpcsvc/nis_callback.h, include/rpcsvc/nislib.h
* include/rpcsvc/yp.h, include/rpcsvc/ypclnt.h
* include/rpcsvc/ypupd.h, include/shadow.h
* include/stdio_ext.h, include/sys/epoll.h
* include/sys/file.h, include/sys/gmon.h, include/sys/ioctl.h
* include/sys/prctl.h, include/sys/profil.h
* include/sys/statfs.h, include/sys/sysctl.h
* include/sys/sysinfo.h, include/ttyent.h, include/utmp.h
* sysdeps/arm/nacl/include/bits/setjmp.h
* sysdeps/mips/include/sys/asm.h
* sysdeps/unix/sysv/linux/include/sys/sysinfo.h
* sysdeps/unix/sysv/linux/include/sys/timex.h
* sysdeps/x86/fpu/include/bits/fenv.h:
Add #ifndef _ISOMAC guard around internal declarations.
Add multiple-inclusion guard if not already present.
|
|
sys/ucontext.h unconditionally uses stack_t, and it does not make
sense to change that. But signal.h only declares stack_t under
__USE_XOPEN_EXTENDED || __USE_XOPEN2K8. The actual definition is
already in a bits header, bits/sigstack.h, but that header insists on
only bei |
