| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
The valid_nanoseconds () static inline function has been introduced to
check if nanoseconds value is in the correct range - greater or equal to
zero and less than 1000000000.
The explicit #include <time.h> has been added to files where it was
missing.
The __syscall_slong_t type for ns has been used to avoid issues on x32.
Tested with:
- scripts/build-many-glibcs.py
- make PARALLELMFLAGS="-j12" && make PARALLELMFLAGS="-j12" xcheck on x86_64
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
Add:
int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec
*abstime)
which behaves just like sem_timedwait, but measures abstime against the
specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC
and sets errno == EINVAL if any other clock is specified.
* nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add
clockid parameters to indicate the clock which abstime should be
measured against.
* nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c
(__new_sem_wait): Pass CLOCK_REALTIME as clockid to
__new_sem_wait_slow.
* nptl/sem_clockwait.c: New file to implement sem_clockwait based
on sem_timedwait.c.
* nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for
sem_clockwait.c to match those used for sem_timedwait.c.
* sysdeps/pthread/semaphore.h: Add sem_clockwait.
* nptl/Versions (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/microblaze/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist
(GLIBC_2.30): Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist
(GLIBC_2.30): Likewise.
* nptl/tst-sem17.c: Add new test for passing invalid clock to
sem_clockwait.
* nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait
tests to also test sem_clockwait.
* manual/threads.texi: Document sem_clockwait.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Except the following functions, NPTL implementation assume sem_t
argument (or other arguments) are not NULL, so they would benefit
from having the nonnull attribute.
- sem_close(): can cope with a NULL sem_t and return -1 with error EINVAL;
- sem_destroy(): does nothing at all
* sysdeps/pthread/semaphore.h (sem_init): Add __nonnull attribute.
(sem_destroy, sem_open, sem_close, sem_unlink): Likewise.
(sem_wait, sem_timedwait, sem_trywait, sem_post): Likewise.
(sem_getvalue): Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
* sysdeps/pthread/bits/types/sigevent_t.h: New file, based on the
generic version but include <bits/pthreadtypes.h> to make struct
sigevent's sigev_notify_attributes field a pthread_attr_t*.
|
|
* hurd/hurdauth.c (_S_msg_add_auth): Call __vm_allocate and
__vm_deallocate instead of vm_allocate and vm_deallocate.
* hurd/hurdmsg.c (_S_msg_set_env_variable): Call __setenv instead of
setenv.
* hurd/hurdprio.c (_hurd_priority_which_map): Call __geteuid instead
of geteuid.
* hurd/path-lookup.c (file_name_path_scan): Call __strdup instead of
strdup.
* hurd/siginfo.c: Include <libioP.h>.
(_hurd_siginfo_handler): Call _IO_puts instead of puts.
* hurd/xattr.c (_hurd_xattr_get, _hurd_xattr_set): Call __munmap instead of
munmap.
* io/fts.c (fts_build): Call __dirfd instead of dirfd.
* mach/devstream.c: Include <libioP.h>.
(dealloc_ref): Call __mach_port_deallocate instead of
mach_port_deallocate.
(mach_open_devstream): Call _IO_fopencookie instead of fopencookie.
Call __mach_port_deallocate instead of mach_port_deallocate.
* stdlib/canonicalize.c (__realpath): Call __pathconf instead of
pathconf.
* sysdeps/mach/hurd/ifreq.c (__ifreq): Call __munmap instead of
munmap.
* sysdeps/mach/hurd/ifreq.h (__if_freereq): Likewise.
* sysdeps/mach/hurd/ptrace.c (ptrace): Call __kill instead of kill.
* sysdeps/mach/hurd/sendfile64.c (sendfile64): Call __munmap instead
of munmap.
* sysdeps/mach/hurd/socketpair.c (__socketpair): Call __close instead
of close.
* sysdeps/posix/clock_getres.c (realtime_getres): Call __sysconf
instead of sysconf.
* sysdeps/pthread/timer_gettime.c (timer_gettime): Call
__clock_gettime instead of clock_gettime.
* sysdeps/pthread/timer_routines.c (thread_func): Likewise.
* sysdeps/pthread/timer_settime.c (timer_settime): Likewise.
* sysdeps/unix/bsd/gtty.c (gtty): Call __ioctl instead of ioctl.
* sysdeps/unix/bsd/stty.c (stty): Likewise.
* sysdeps/unix/bsd/tcflow.c (tcflow): Call __tcgetattr instead of
tcgetattr.
* sysdeps/unix/clock_nanosleep.c (__clock_nanosleep): Call
__clock_gettime and __nanosleep instead of clock_gettime and
nanosleep.
|
|
* sysdeps/pthread/timer_routines.c (__timer_thread_start): Block all
signals in thread created for runing timers.
|
|
* sysdeps/pthread/timer_routines.c: Include <timer_routines.h>
instead of <internaltypes.h>.
|
|
* sysdeps/pthread/timer_routines.c: [!defined DELAYTIMER_MAX]
(DELAYTIMER_MAX): Define to INT_MAX.
|
|
* sysdeps/pthread/timer_routines.c: Include <timer_routines.h> instead
of <nptl/pthreadP.h>
(thread_attr_compare): Move function to...
* sysdeps/nptl/timer_routines.h: ... new header.
|
|
* sysdeps/pthread/allocalim.h (__libc_use_alloca): Use __glibc_likely
instead of __builtin_expect.
|
|
* sysdeps/pthread/allocalim.h (__libc_use_alloca): Commute operands of
|| to respect codestyle.
|
|
* sysdeps/pthread/allocalim.h [!defined PTHREAD_STACK_MIN]: Do not
check size against PTHREAD_STACK_MIN.
|
|
timer_ptr2id and timer_id2ptr are used to convert between
application-visible timer_t and struct timer_node *. timer_ptr2id was made
to use void * instead of timer_t in 49b650430eb5 ('Update.') for no reason.
It happens that on Linux timer_t is void *, so both that change and this
commit are no-ops there, but not on systems where timer_t is not void *.
Using timer_ptr2id for filling sival_ptr also does not make sense since that
actually is a void *.
* sysdeps/pthread/posix-timer.h (timer_ptr2id): Cast to timer_t
instead of void *.
* sysdeps/pthread/timer_create.c (timer_create): Do not use
timer_ptr2id to cast struct timer_node * to void *.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
libio.h was originally the header for a set of supported GNU
extensions, but they have not been maintained as such in many years,
they are now standing in the way of improvements to stdio, and we
don't think there are any remaining external users. _G_config.h was
never intended for public use, but predates the bits convention.
Move both of these headers into the bits directory and provide stubs
at top level which issue deprecation warnings.
The contents of (bits/)libio.h and (bits/)_G_config.h are still
exposed to external software via stdio.h; changing that requires more
complex surgery than I have time to attempt right now.
* libio/libio.h, libio/_G_config.h: New stub headers which issue a
deprecation warning and then include <bits/libio.h>, <bits/_G_config.h>
respectively.
* libio/libio.h: Rename the original version of this file to
libio/bits/libio.h. Error out if not included by stdio.h or the
stub libio.h.
* include/libio.h: Move to include/bits. Forward to libio/bits/libio.h.
* sysdeps/generic/_G_config.h: Move to top-level bits/. Error out
if not included by bits/libio.h or the stub _G_config.h.
* sysdeps/unix/sysv/linux/_G_config.h: Move to
sysdeps/unix/sysv/linux/bits. Error out if not included by
bits/libio.h or the stub _G_config.h.
* libio/stdio.h: Include bits/libio.h, not libio.h.
* libio/Makefile: Install bits/libio.h and bits/_G_config.h as
well as libio.h and _G_config.h.
* csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c
* libio/strfile.h, stdio-common/vfscanf.c
* sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c
Include stdio.h, not _G_config.h nor libio.h.
* libio/iofgetpos.c: Also rename fgetpos64 out of the way.
* libio/iofsetpos.c: Also rename fsetpos64 out of the way.
* scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
|
|
|
|
This was originally added to support LinuxThreads and is not needed for
NPTL.
|
|
Locking overhead can be significant in some stdio operations
that are common in single threaded applications.
This patch adds the _IO_FLAGS2_NEED_LOCK flag to indicate if
an _IO_FILE object needs to be locked and some of the stdio
functions just jump to their _unlocked variant when not. The
flag is set on all _IO_FILE objects when the first thread is
created. A new GLIBC_PRIVATE libc symbol, _IO_enable_locks,
was added to do this from libpthread.
The optimization can be applied to more stdio functions,
currently it is only applied to single flag check or single
non-wide-char standard operations. The flag should probably
be never set for files with _IO_USER_LOCK, but that's just a
further optimization, not a correctness requirement.
The optimization is valid in a single thread because stdio
operations are non-as-safe (so lock state is not observable
from a signal handler) and stdio locks are recursive (so lock
state is not observable via deadlock). The optimization is not
valid if a thread may be created while an stdio lock is taken
and thus it should be disabled if any user code may run during
an stdio operation (interposed malloc, printf hooks, etc).
This makes the optimization more complicated for some stdio
operations (e.g. printf), but those are bigger and thus less
important to optimize so this patch does not try to do that.
* libio/libio.h (_IO_FLAGS2_NEED_LOCK, _IO_need_lock): Define.
* libio/libioP.h (_IO_enable_locks): Declare.
* libio/Versions (_IO_enable_locks): New symbol.
* libio/genops.c (_IO_enable_locks): Define.
(_IO_old_init): Initialize flags2.
* libio/feof.c.c (_IO_feof): Avoid locking when not needed.
* libio/ferror.c (_IO_ferror): Likewise.
* libio/fputc.c (fputc): Likewise.
* libio/putc.c (_IO_putc): Likewise.
* libio/getc.c (_IO_getc): Likewise.
* libio/getchar.c (getchar): Likewise.
* libio/ioungetc.c (_IO_ungetc): Likewise.
* nptl/pthread_create.c (__pthread_create_2_1): Enable stdio locks.
* libio/iofopncook.c (_IO_fopencookie): Enable locking for the file.
* sysdeps/pthread/flockfile.c (__flockfile): Likewise.
|
|
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
|
|
The <bits/sigthread.h> header is included by <signal.h>, not <pthread.h>.
|
|
* crypt/md5.h: Test _LIBC with #if defined, not #if.
* dirent/opendir-tst1.c: Include sys/stat.h.
* dirent/tst-fdopendir.c: Include sys/stat.h.
* dirent/tst-fdopendir2.c: Include stdlib.h.
* dirent/tst-scandir.c: Include stdbool.h.
* elf/tst-auditmod1.c: Include link.h and stddef.h.
* elf/tst-tls15.c: Include stdlib.h.
* elf/tst-tls16.c: Include stdlib.h.
* elf/tst-tls17.c: Include stdlib.h.
* elf/tst-tls18.c: Include stdlib.h.
* iconv/tst-iconv6.c: Include endian.h.
* iconvdata/bug-iconv11.c: Include limits.h.
* io/test-utime.c: Include stdint.h.
* io/tst-faccessat.c: Include sys/stat.h.
* io/tst-fchmodat.c: Include sys/stat.h.
* io/tst-fchownat.c: Include sys/stat.h.
* io/tst-fstatat.c: Include sys/stat.h.
* io/tst-futimesat.c: Include sys/stat.h.
* io/tst-linkat.c: Include sys/stat.h.
* io/tst-mkdirat.c: Include sys/stat.h and stdbool.h.
* io/tst-mkfifoat.c: Include sys/stat.h and stdbool.h.
* io/tst-mknodat.c: Include sys/stat.h and stdbool.h.
* io/tst-openat.c: Include stdbool.h.
* io/tst-readlinkat.c: Include sys/stat.h.
* io/tst-renameat.c: Include sys/stat.h.
* io/tst-symlinkat.c: Include sys/stat.h.
* io/tst-unlinkat.c: Include stdbool.h.
* libio/bug-memstream1.c: Include stdlib.h.
* libio/bug-wmemstream1.c: Include stdlib.h.
* libio/tst-fwrite-error.c: Include stdlib.h.
* libio/tst-memstream1.c: Include stdlib.h.
* libio/tst-memstream2.c: Include stdlib.h.
* libio/tst-memstream3.c: Include stdlib.h.
* malloc/tst-interpose-aux.c: Include stdint.h.
* misc/tst-preadvwritev-common.c: Include sys/stat.h.
* nptl/tst-basic7.c: Include limits.h.
* nptl/tst-cancel25.c: Include pthread.h, not pthreadP.h.
* nptl/tst-cancel4.c: Include stddef.h, limits.h, and sys/stat.h.
* nptl/tst-cancel4_1.c: Include stddef.h.
* nptl/tst-cancel4_2.c: Include stddef.h.
* nptl/tst-cond16.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond18.c: Include limits.h.
Use sysconf(_SC_PAGESIZE) instead of __getpagesize.
* nptl/tst-cond4.c: Include stdint.h.
* nptl/tst-cond6.c: Include stdint.h.
* nptl/tst-stack2.c: Include limits.h.
* nptl/tst-stackguard1.c: Include stddef.h.
* nptl/tst-tls4.c: Include stdint.h. Don't include tls.h.
* nptl/tst-tls4moda.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls4modb.c: Include stddef.h.
Don't include stdio.h, unistd.h, or tls.h.
* nptl/tst-tls5.h: Include stddef.h. Don't include stdlib.h or tls.h.
* posix/tst-getaddrinfo2.c: Include stdio.h.
* posix/tst-getaddrinfo5.c: Include stdio.h.
* posix/tst-pathconf.c: Include sys/stat.h.
* posix/tst-posix_fadvise-common.c: Include stdint.h.
* posix/tst-preadwrite-common.c: Include sys/stat.h.
* posix/tst-regex.c: Include stdint.h.
Don't include spawn.h or spawn_int.h.
* posix/tst-regexloc.c: Don't include spawn.h or spawn_int.h.
* posix/tst-vfork3.c: Include sys/stat.h.
* resolv/tst-bug18665-tcp.c: Include stdlib.h.
* resolv/tst-res_hconf_reorder.c: Include stdlib.h.
* resolv/tst-resolv-search.c: Include stdlib.h.
* stdio-common/tst-fmemopen2.c: Include stdint.h.
* stdio-common/tst-vfprintf-width-prec.c: Include stdlib.h.
* stdlib/test-canon.c: Include sys/stat.h.
* stdlib/tst-tls-atexit.c: Include stdbool.h.
* string/test-memchr.c: Include stdint.h.
* string/tst-cmp.c: Include stdint.h.
* sysdeps/pthread/tst-timer.c: Include stdint.h.
* sysdeps/unix/sysv/linux/tst-sync_file_range.c: Include stdint.h.
* sysdeps/wordsize-64/tst-writev.c: Include limits.h and stdint.h.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/tst-auditmod10b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod3b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod4b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod5b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6b.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod6c.c: Include link.h and stddef.h.
* sysdeps/x86_64/tst-auditmod7b.c: Include link.h and stddef.h.
* time/clocktest.c: Include stdint.h.
* time/tst-posixtz.c: Include stdint.h.
* timezone/tst-timezone.c: Include stdint.h.
|
|
|
|
Many headers are expected to expose a subset of the type definitions
in time.h. time.h has a whole bunch of messy logic for conditionally
defining some its types and structs, but, as best I can tell, this
has never worked 100%. In particular, __need_timespec is ineffective
if _TIME_H has already been defined, which means that if you compile
#include <time.h>
#include <sched.h>
with e.g. -fsyntax-only -std=c89 -Wall -Wsystem-headers, you will get
In file included from test.c:2:0:
/usr/include/sched.h:74:57: warning: "struct timespec" declared inside
parameter list will not be visible outside of this definition or declaration
extern int sched_rr_get_interval (__pid_t __pid, struct timespec *__t) __THROW;
^~~~~~~~
And if you want to _use_ sched_rr_get_interval in a TU compiled that
way, you're hosed.
This patch replaces all of that with small bits/types/TYPE.h headers
as introduced earlier. time.h and bits/time.h are now *much* simpler,
and a lot of other headers are slightly simpler.
* time/time.h, bits/time.h, sysdeps/unix/sysv/linux/bits/time.h:
Remove all logic conditional on __need macros. Move all the
conditionally defined types to their own headers...
* time/bits/types/clock_t.h: Define clock_t here.
* time/bits/types/clockid_t.h: Define clockid_t here.
* time/bits/types/struct_itimerspec.h: Define struct itimerspec here.
* time/bits/types/struct_timespec.h: Define struct timespec here.
* time/bits/types/struct_timeval.h: Define struct timeval here.
* time/bits/types/struct_tm.h: Define struct tm here.
* time/bits/types/time_t.h: Define time_t here.
* time/bits/types/timer_t.h: Define timer_t here.
* time/Makefile: Install the new headers.
* bits/resource.h, io/fcntl.h, io/sys/poll.h, io/sys/stat.h
* io/utime.h, misc/sys/select.h, posix/sched.h, posix/sys/times.h
* posix/sys/types.h, resolv/netdb.h, rt/aio.h, rt/mqueue.h
* signal/signal.h, pthread/semaphore.h, sysdeps/nptl/pthread.h
* sysdeps/unix/sysv/linux/alpha/bits/resource.h
* sysdeps/unix/sysv/linux/alpha/sys/acct.h
* sysdeps/unix/sysv/linux/bits/resource.h
* sysdeps/unix/sysv/linux/bits/timex.h
* sysdeps/unix/sysv/linux/mips/bits/resource.h
* sysdeps/unix/sysv/linux/net/ppp_defs.h
* sysdeps/unix/sysv/linux/sparc/bits/resource.h
* sysdeps/unix/sysv/linux/sys/acct.h
* sysdeps/unix/sysv/linux/sys/timerfd.h
* sysvipc/sys/msg.h, sysvipc/sys/sem.h, sysvipc/sys/shm.h
* time/sys/time.h, time/sys/timeb.h
Use the new bits/types headers.
* include/time.h: Remove __need logic.
* include/bits/time.h
* include/bits/types/clock_t.h, include/bits/types/clockid_t.h
* include/bits/types/time_t.h, include/bits/types/timer_t.h
* include/bits/types/struct_itimerspec.h
* include/bits/types/struct_timespec.h
* include/bits/types/struct_timeval.h
* include/bits/types/struct_tm.h:
New wrapper headers.
|
|
This reverts commit fd67a9cf7b733da082e4b6a5f25c19ea7921b4cd.
|
