diff options
| -rw-r--r-- | ChangeLog | 20 | ||||
| -rw-r--r-- | Makeconfig | 10 | ||||
| -rw-r--r-- | config.make.in | 2 | ||||
| -rwxr-xr-x | configure | 1131 | ||||
| -rw-r--r-- | configure.in | 115 | ||||
| -rw-r--r-- | libidn/ChangeLog | 4 | ||||
| -rw-r--r-- | linuxthreads/ChangeLog | 4 | ||||
| -rw-r--r-- | nptl/ChangeLog | 4 | ||||
| -rw-r--r-- | sysdeps/unix/sysv/linux/bits/in.h | 9 |
9 files changed, 500 insertions, 799 deletions
@@ -1,3 +1,21 @@ +2004-07-20 Roland McGrath <roland@redhat.com> + + * configure.in (add_ons): Substitute this. Move $add_ons handling + after AC_CANONICAL_HOST and default setting of $machine et al. + Don't set $subdirs from $add_ons. + Instead, source add-on/configure fragments early on. + (base_machine): If it's already set, don't set it based on $machine. + (libc_config_ok): New variable, set to no. If an add-on fragment sets + it to yes, skip the tuple sanity check as if --enable-hacker-mode. + (sysnames): Try appending add-on names after machine as well. + * configure: Regenerated. + * config.make.in (add-ons): Set from @add_ons@ instead of @subdirs@. + * Makeconfig ($(common-objpfx)config.status): Also depend on configure + files in $(add_ons) dirs. + + * sysdeps/unix/sysv/linux/bits/in.h (struct ip_mreq): Remove + definition, now in netinet/in.h proper. + 2004-07-20 Alexandre Oliva <aoliva@redhat.com> * sysdeps/unix/sysv/linux/mips/Makefile ($(objpfx)syscall-%.h): @@ -136,7 +154,7 @@ [BZ #266] * manual/string.texi (l64a): Note that the static buffer is 7 bytes - long. Rewrite example code so that it takes account l64a output + long. Rewrite example code so that it takes into account l64a output shorter than 6 characters. Reported by Julian Graham <julian.graham@aya.yale.edu>. diff --git a/Makeconfig b/Makeconfig index 92501a78c0..0b8502192e 100644 --- a/Makeconfig +++ b/Makeconfig @@ -110,15 +110,19 @@ $(common-objpfx)config.make: $(common-objpfx)config.status \ $(..)config.make.in $(..)config.h.in cd $(<D); $(SHELL) $(<F) -# Find all the sysdeps configure fragments, to make sure we re-run -# configure when any of them changes. +# Find all the add-on and sysdeps configure fragments, to make sure we +# re-run configure when any of them changes. $(common-objpfx)config.status: $(..)version.h $(..)configure \ $(foreach dir,$(full_config_sysdirs),\ $(wildcard \ $(dir)/Implies) \ $(patsubst %.in,%,\ $(firstword $(wildcard \ - $(addprefix $(dir)/,configure configure.in))))) + $(addprefix $(dir)/,configure configure.in))))) \ + $(patsubst %.in,%,\ + $(foreach dir,$(add_ons),\ + $(firstword $(wildcard \ + $(addprefix $(..)$(dir)/,configure configure.in))))) @cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \ echo The GNU C library has not been configured. >&2; \ echo Run \`configure\' to configure it before building. >&2; \ diff --git a/config.make.in b/config.make.in index dd3aa8fe8a..b48dbb4fc5 100644 --- a/config.make.in +++ b/config.make.in @@ -87,7 +87,7 @@ build-profile = @profile@ build-omitfp = @omitfp@ build-bounded = @bounded@ build-static-nss = @static_nss@ -add-ons = @subdirs@ +add-ons = @add_ons@ cross-compiling = @cross_compiling@ force-install = @force_install@ @@ -1,11 +1,12 @@ #! /bin/sh # From configure.in CVSid. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for GNU C Library (see version.h). +# Generated by GNU Autoconf 2.57 for GNU C Library (see version.h). # # Report bugs to <glibc>. # -# Copyright (C) 2003 Free Software Foundation, Inc. +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## @@ -22,10 +23,9 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi -DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then as_unset=unset else as_unset=false @@ -44,7 +44,7 @@ for as_var in \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var @@ -221,17 +221,16 @@ rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else - test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" # Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" # IFS @@ -313,7 +312,7 @@ ac_includes_default="\ # include <unistd.h> #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS with_fp with_cvs enable_check_abi oldest_abi bindnow subdirs force_install all_warnings build build_cpu build_vendor build_os host host_cpu host_vendor host_os base_machine sysnames INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT BUILD_CC cross_compiling CPP CXX CXXFLAGS ac_ct_CXX AR OBJDUMP RANLIB ac_ct_RANLIB MIG AS LD PWD_P MAKE MSGFMT MAKEINFO SED AUTOCONF SYSINCLUDES libc_cv_gcc_static_libgcc BASH libc_cv_have_bash2 KSH libc_cv_have_ksh AWK PERL INSTALL_INFO BISON VERSIONING libc_cv_asm_protected_directive libc_cv_initfinit_array libc_cv_cc_with_libunwind libc_cv_z_nodelete libc_cv_z_nodlopen libc_cv_z_initfirst libc_cv_z_relro libc_cv_Bgroup libc_cv_libgcc_s_suffix libc_cv_as_needed ASFLAGS_config libc_cv_z_combreloc libc_cv_z_execstack libc_cv_fpie fno_unit_at_a_time libc_cv_have_initfini libc_cv_cpp_asm_debuginfo no_whole_archive exceptions LIBGD EGREP sizeof_long_double libc_cv_gcc_unwind_find_fde uname_sysname uname_release uname_version old_glibc_headers libc_cv_slibdir libc_cv_localedir libc_cv_sysconfdir libc_cv_rootsbindir libc_cv_forced_unwind use_ldconfig ldd_rewrite_script gnu_ld gnu_as elf xcoff static shared pic_default profile omitfp bounded static_nss nopic_initfini DEFINES linux_doors mach_interface_list VERSION RELEASE LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS with_fp with_cvs enable_check_abi oldest_abi bindnow force_install all_warnings build build_cpu build_vendor build_os host host_cpu host_vendor host_os subdirs add_ons base_machine sysnames INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA LN_S CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT BUILD_CC cross_compiling CPP CXX CXXFLAGS ac_ct_CXX AR OBJDUMP RANLIB ac_ct_RANLIB MIG AS LD PWD_P MAKE MSGFMT MAKEINFO SED AUTOCONF SYSINCLUDES libc_cv_gcc_static_libgcc BASH libc_cv_have_bash2 KSH libc_cv_have_ksh AWK PERL INSTALL_INFO BISON VERSIONING libc_cv_asm_protected_directive libc_cv_initfinit_array libc_cv_cc_with_libunwind libc_cv_z_nodelete libc_cv_z_nodlopen libc_cv_z_initfirst libc_cv_z_relro libc_cv_Bgroup libc_cv_libgcc_s_suffix libc_cv_as_needed ASFLAGS_config libc_cv_z_combreloc libc_cv_z_execstack libc_cv_fpie fno_unit_at_a_time libc_cv_have_initfini libc_cv_cpp_asm_debuginfo no_whole_archive exceptions LIBGD EGREP sizeof_long_double libc_cv_gcc_unwind_find_fde uname_sysname uname_release uname_version old_glibc_headers libc_cv_slibdir libc_cv_localedir libc_cv_sysconfdir libc_cv_rootsbindir libc_cv_forced_unwind use_ldconfig ldd_rewrite_script gnu_ld gnu_as elf xcoff static shared pic_default profile omitfp bounded static_nss nopic_initfini DEFINES linux_doors mach_interface_list VERSION RELEASE LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -672,7 +671,7 @@ done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir + localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in @@ -712,10 +711,10 @@ if test -z "$srcdir"; then # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } @@ -815,9 +814,9 @@ _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] + [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] + [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify @@ -951,45 +950,12 @@ case $srcdir in ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. @@ -1000,7 +966,7 @@ esac echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then + test -f $ac_srcdir/configure.in; then echo $ac_configure --help else @@ -1014,9 +980,10 @@ test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF GNU C Library configure (see version.h) -generated by GNU Autoconf 2.59 +generated by GNU Autoconf 2.57 -Copyright (C) 2003 Free Software Foundation, Inc. +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1028,7 +995,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by GNU C Library $as_me (see version.h), which was -generated by GNU Autoconf 2.59. Invocation command line was +generated by GNU Autoconf 2.57. Invocation command line was $ $0 $@ @@ -1105,19 +1072,19 @@ do 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. + ac_must_keep_next=false # Got value, back to normal. else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac fi ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" # Get rid of the leading space. @@ -1151,12 +1118,12 @@ _ASBOX case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } @@ -1185,7 +1152,7 @@ _ASBOX for ac_var in $ac_subst_files do eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" + echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo fi @@ -1204,7 +1171,7 @@ _ASBOX echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 - rm -f core *.core && + rm -f core core.* *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 @@ -1284,7 +1251,7 @@ fi # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" @@ -1301,13 +1268,13 @@ echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: + ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. @@ -1641,51 +1608,6 @@ else fi; - - -subdirs="$subdirs " -add_ons_pfx= -if test x"$add_ons" != x; then - for f in $add_ons; do - # Some sanity checks - if test "$f" = "crypt"; then - { { echo "$as_me:$LINENO: error: -*** It seems that you're using an old \`crypt' add-on. crypt is now -*** part of glibc and using the old add-on will not work with this -*** release. Start again with fresh sources and without the old -*** \`crypt' add-on." >&5 -echo "$as_me: error: -*** It seems that you're using an old \`crypt' add-on. crypt is now -*** part of glibc and using the old add-on will not work with this -*** release. Start again with fresh sources and without the old -*** \`crypt' add-on." >&2;} - { (exit 1); exit 1; }; } - fi - if test "$f" = "localedata"; then - { { echo "$as_me:$LINENO: error: -*** It seems that you're using an old \`localedata' add-on. localedata -*** is now part of glibc and using the old add-on will not work with -*** this release. Start again with fresh sources and without the old -*** \`localedata' add-on." >&5 -echo "$as_me: error: -*** It seems that you're using an old \`localedata' add-on. localedata -*** is now part of glibc and using the old add-on will not work with -*** this release. Start again with fresh sources and without the old -*** \`localedata' add-on." >&2;} - { (exit 1); exit 1; }; } - fi - # Test whether such a subdir really exists. - if test -d $srcdir/$f; then - add_ons_pfx="$add_ons_pfx $f/" - subdirs="$subdirs $f" - else - { { echo "$as_me:$LINENO: error: add-on directory \"$f\" does not exist" >&5 -echo "$as_me: error: add-on directory \"$f\" does not exist" >&2;} - { (exit 1); exit 1; }; } - fi - done -fi - # Check whether --enable-static-nss or --disable-static-nss was given. if test "${enable_static_nss+set}" = set; then enableval="$enable_static_nss" @@ -1829,6 +1751,9 @@ aix*) ;; esac +# The configure fragment of an add-on port can modify these to supplement +# or override the table in the case statement below. No fragment should +# ever change the config_* variables, however. machine=$config_machine vendor=$config_vendor os=$config_os @@ -1846,6 +1771,75 @@ case "$machine-$host_os" in ;; esac + +# An add-on can set this when it the tuple to disable the sanity check below. +libc_config_ok=no + + + +subdirs="$subdirs " + + +add_ons_sfx= +add_ons_pfx= +if test x"$add_ons" != x; then + for f in $add_ons; do + # Some sanity checks + case "$f" in + crypt) + { { echo "$as_me:$LINENO: error: +*** It seems that you're using an old \`crypt' add-on. crypt is now +*** part of glibc and using the old add-on will not work with this +*** release. Start again with fresh sources and without the old +*** \`crypt' add-on." >&5 +echo "$as_me: error: +*** It seems that you're using an old \`crypt' add-on. crypt is now +*** part of glibc and using the old add-on will not work with this +*** release. Start again with fresh sources and without the old +*** \`crypt' add-on." >&2;} + { (exit 1); exit 1; }; } + ;; + localedata) + { { echo "$as_me:$LINENO: error: +*** It seems that you're using an old \`localedata' add-on. localedata +*** is now part of glibc and using the old add-on will not work with +*** this release. Start again with fresh sources and without the old +*** \`localedata' add-on." >&5 +echo "$as_me: error: +*** It seems that you're using an old \`localedata' add-on. localedata +*** is now part of glibc and using the old add-on will not work with +*** this release. Start again with fresh sources and without the old +*** \`localedata' add-on." >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + # Test whether such a subdir really exists. + if test -d $srcdir/$f; then + add_ons_pfx="$add_ons_pfx $f/" + add_ons_sfx="$add_ons_sfx /$f" + else + { { echo "$as_me:$LINENO: error: add-on directory \"$f\" does not exist" >&5 +echo "$as_me: error: add-on directory \"$f\" does not exist" >&2;} + { (exit 1); exit 1; }; } + fi + done + + for f in $add_ons; do + frag=$srcdir/$f/configure + if test -r $frag; then + echo "$as_me:$LINENO: result: running configure fragment for add-on $f" >&5 +echo "${ECHO_T}running configure fragment for add-on $f" >&6 + . $frag + else + { echo "$as_me:$LINENO: WARNING: add-on fragment $frag missing" >&5 +echo "$as_me: WARNING: add-on fragment $frag missing" >&2;} + fi + done +fi + + + ### ### I put this here to prevent those annoying emails from people who cannot ### read and try to compile glibc on unsupported platforms. --drepper @@ -1854,7 +1848,7 @@ esac ### one can skip this test to make the configuration not fail for unsupported ### platforms. ### -if test -z "$enable_hacker_mode"; then +if test -z "$enable_hacker_mode" && test x"$libc_config_ok" != xyes; then case "$machine-$host_os" in *-linux* | *-gnu* | arm*-none* | powerpc-aix4.3.*) ;; @@ -1871,8 +1865,9 @@ if test -z "$enable_hacker_mode"; then fi # Expand the configuration machine name into a subdirectory by architecture -# type and particular chip. -case "$machine" in +# type and particular chip. If an add-on configure fragment already set +# base_machine, we don't change it. +test -n "$base_machine" || case "$machine" in a29k | am29000) base_machine=a29k machine=a29k ;; alpha*) base_machine=alpha machine=alpha/$machine ;; arm*) base_machine=arm machine=arm/arm32/$machine ;; @@ -2027,16 +2022,18 @@ for d in $add_ons_pfx ''; do for o in /$ostry ''; do test "$o" = / && continue for m in $mach ''; do - if test "$m0$b$v$o$m"; then - try="${d}sysdeps$m0$b$v$o$m" - test -n "$enable_debug_configure" && - echo "$0 DEBUG: try $try" >&2 - if test -d $srcdir/$try; then - sysnames="$sysnames $try" - { test -n "$o" || test -n "$b"; } && os_used=t - { test -n "$m" || test -n "$m0"; } && machine_used=t + for a in $add_ons_sfx ''; do + if test "$m0$b$v$o$m"; then + try="${d}sysdeps$m0$b$v$o$m$a" + test -n "$enable_debug_configure" && + echo "$0 DEBUG: try $try" >&2 + if test -d $srcdir/$try; then + sysnames="$sysnames $try" + { test -n "$o" || test -n "$b"; } && os_used=t + { test -n "$m" || test -n "$m0"; } && machine_used=t + fi fi - fi + done done done done @@ -2177,7 +2174,6 @@ echo "${ECHO_T}$default_sysnames" >&6 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 @@ -2194,7 +2190,6 @@ do case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -2202,20 +2197,20 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_pro |