| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is required so that fclose, when trying to seek to the right
position after filling the input buffer, does not fail with EINVAL.
This fclose code path only ignores ESPIPE errors.
Reported by Petr Pisar on
<https://bugzilla.redhat.com/show_bug.cgi?id=2358265>.
Fixes commit be6818be31e756398e45f70e2819d78be0961223 ("Make fclose
seek input file to right offset (bug 12724)").
Reviewed-by: Frédéric Bérat <fberat@redhat.com>
|
|
Move the initialization code to a general place instead of keeping it
specific to file-backed streams.
Fixes: 596a61cf6b (libio: Start to return errors when flushing fwrite's buffer [BZ #29459], 2025-01-28)
Reported-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Arjun Shankar <arjun@redhat.com>
|
|
As discussed in bug 32535, fflush fails on files opened for reading
using mmap after ungetc. Fix the logic to handle this case and still
compute the file offset correctly.
Tested for x86_64.
|
|
As discussed in bug 32529, fseek fails on files opened for reading
using mmap after ungetc. The implementation of fseek for such files
has an offset computation that's also incorrect after fflush. A
combined fix addresses both problems (with tests for both included as
well) and it seems reasonable to consider them a single bug.
Tested for x86_64.
|
|
As discussed in bug 12724 and required by POSIX, before an input file
(based on an underlying seekable file descriptor) is closed, fclose is
sometimes required to seek that file descriptor to the correct offset,
so that any other file descriptors sharing the underlying open file
description are left at that offset (as a motivating example, a script
could call a sequence of commands each of which processes some data
from (seekable) stdin using stdio; fclose needs to do this so that
each successive command can read exactly the data not handled by
previous commands), but glibc fails to do this.
The precise POSIX wording has changed a few times; in the 2024 edition
it's "If the file is not already at EOF, and the file is one capable
of seeking, the file offset of the underlying open file description
shall be set to the file position of the stream if the stream is the
active handle to the underlying file description.".
Add appropriate logic to _IO_new_file_close_it to handle this case. I
haven't made any attempt to test or change things in this area for the
"old" functions.
Note that there was a previous attempt to fix bug 12724, reverted in
commit eb6cbd249f4465b01f428057bf6ab61f5f0c07e3. The fix version here
addresses the original test in that bug report without breaking the
one given in a subsequent comment in that bug report (which works with
glibc before the patch, but maybe was broken by the original fix that
was reverted).
The logic here tries to take care not to seek the file, even to its
newly computed current offset, if at EOF / possibly not the active
handle; even seeking to the current offset would be problematic
because of a potential race (fclose computes the current offset,
another thread or process with the active handle does its own seek,
fclose does a seek (not permitted by POSIX in this case) that loses
the effect of the seek on the active handle in another thread or
process). There are tests included for various cases of being or not
being the active handle, though there aren't tests for the potential
race condition.
Tested for x86_64.
|
|
As discussed in bug 5994 (plus duplicates), POSIX requires fflush
after ungetc to discard pushed-back characters but preserve the file
position indicator. For this purpose, each ungetc decrements the file
position indicator by 1; it is unspecified after ungetc at the start
of the file, and after ungetwc, so no special handling is needed for
either of those cases.
This is fixed with appropriate logic in _IO_new_file_sync. I haven't
made any attempt to test or change things in this area for the "old"
functions; the case of files using mmap is addressed in a subsequent
patch (and there seem to be no problems in this area with files opened
with fmemopen).
Tested for x86_64.
|
|
When an error happens, fwrite is expected to return a value that is less
than nmemb. If this error happens while flushing its internal buffer,
fwrite is in a complex scenario: all the data might have been written to
the buffer, indicating a successful copy, but the buffer is expected to
be flushed and it was not.
POSIX.1-2024 states the following about errors on fwrite:
If an error occurs, the resulting value of the file-position indicator
for the stream is unspecified.
The fwrite() function shall return the number of elements successfully
written, which may be less than nitems if a write error is encountered.
With that in mind, this commit modifies _IO_new_file_write in order to
return the total number of bytes written via the file pointer. It also
modifies fwrite in order to use the new information and return the
correct number of bytes written even when sputn returns EOF.
Add 2 tests:
1. tst-fwrite-bz29459: This test is based on the reproducer attached to
bug 29459. In order to work, it requires to pipe stdout to another
process making it hard to reuse test-driver.c. This code is more
specific to the issue reported.
2. tst-fwrite-pipe: Recreates the issue by creating a pipe that is shared
with a child process. Reuses test-driver.c. Evaluates a more generic
scenario.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
|
|
The C standard requires that ungetc guarantees at least one pushback,
but the malloc call to allocate the pushback buffer could fail, thus
violating that requirement. Fix this by adding a single byte pushback
buffer in the FILE struct that the pushback can fall back to if malloc
fails.
The side-effect is that if the initial malloc fails and the 1-byte
fallback buffer is used, future resizing (if it succeeds) will be
2-bytes, 4-bytes and so on, which is suboptimal but it's after a malloc
failure, so maybe even desirable.
A future optimization here could be to have the pushback code use the
single byte buffer first and only fall back to malloc for subsequent
calls.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Maciej W. Rozycki <macro@redhat.com>
|
|
Replace 0 by NULL and {0} by {}.
Omit a few cases that aren't so trivial to fix.
Link: <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117059>
Link: <https://software.codidact.com/posts/292718/292759#answer-292759>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
|
|
In processing the first 7 individual characters of the mode for fopen
if ,ccs= is used those characters will be processed as well. Stop
processing individual mode flags once a comma is encountered. This has
the effect of requiring ,ccs= to be the last mode flag in the mode
string. Add a testcase to check that the ,ccs= mode flag is not
processed as individual mode flags.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Instead of using a special ELF section along with a linker script
directive to put the IO vtables within the RELRO section, the libio
vtables are all moved to an array marked as data.relro (so linker
will place in the RELRO segment without the need of extra directives).
To avoid static linking namespace issues and including all vtable
referenced objects, all required function pointers are set to weak alias.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
|
|
libio can only deal with gconv conversions which consist of a single
step. Not using __gconv_info simplifies the data structures somewhat.
This eliminates a new GCC 10 warning about subscribing an inner
zero-length array.
Tested on x86_64-linux-gnu with mainline GCC. Built with
build-many-glibcs.py, also with mainline GCC. Due to GCC PR 92039,
there are failures left on 32-bit architectures with float128 support.
Change-Id: I8b4c489b619a53154712ff32e1b6f13bb92d4203
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
The codecvt vtable is not a real vtable because it also contains the
conversion state data. Furthermore, wide stream support was added to
GCC 3.0, after a C++ ABI bump, so there is no compatibility
requirement with libstdc++.
This change removes several unmangled function pointers which could
be used with a corrupted FILE object to redirect execution. (libio
vtable verification did not cover the codecvt vtable.)
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
GLIBC explicitly allows one to assign a new FILE pointer to stdout and
other standard streams. printf and wprintf were honouring assignment to
stdout and using the new value, but puts, putchar, and wide char variants
did not.
The stdout part is fixed here. The stdin part will be fixed in a followup.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
|
|
This patch eliminates a number of #if 0 and #ifdef TODO blocks, macros
that are never used, macros that provide portability to substrates that
lack basic things like EINVAL and off_t, and other such debris.
I preserved IO_DEBUG and CHECK_FILE, even though as far as I can tell
IO_DEBUG is never defined and therefore CHECK_FILE never does
anything, because it seems like we might actually want to turn it _on_.
Installed stripped libraries and executables are unchanged, except,
again, that the line number of an assertion changes (this time it's
somewhere in fileops.c).
* libio/libio.h (_IO_pos_BAD, _IO_pos_0, _IO_pos_adjust):
Define here, unconditionally.
* libio/iolibio.h (_IO_pos_BAD): Don't define here.
* libio/libioP.h: Remove #if 0 blocks.
(_IO_pos_BAD, _IO_pos_0, _IO_pos_adjust): Don't define here.
(_IO_va_start, COERCE_FILE, MAYBE_SET_EINVAL): Don't define.
(CHECK_FILE): Don't use MAYBE_SET_EINVAL or COERCE_FILE. Fix style.
* libio/clearerr.c, libio/fputc.c, libio/getchar.c:
Assume weak_alias is always defined.
* libio/fileops.c, libio/genops.c, libio/oldfileops.c
* libio/oldpclose.c, libio/pclose.c, libio/wfileops.c:
Remove #if 0 and #ifdef TODO blocks.
Assume text_set_element is always defined.
* libio/iofdopen.c, libio/iogetdelim.c, libio/oldiofdopen.c
Use __set_errno (EINVAL) instead of MAYBE_SET_EINVAL.
* libio/tst-mmap-eofsync.c: Make #if 1 block unconditional.
|
|
This entirely mechanical (except for some indentation fixups) patch
replaces all uses of _IO_file_flags with _flags and removes the #define.
Installed stripped libraries and executables are unchanged by this patch.
* libio/libio.h (_IO_file_flags): Remove macro.
All uses changed to _flags.
|
|
This patch mechanically removes all remaining uses, and the
definitions, of the following libio name aliases:
name replaced with
---- -------------
_IO_FILE FILE
_IO_fpos_t __fpos_t
_IO_fpos64_t __fpos64_t
_IO_size_t size_t
_IO_ssize_t ssize_t or __ssize_t
_IO_off_t off_t
_IO_off64_t off64_t
_IO_pid_t pid_t
_IO_uid_t uid_t
_IO_wint_t wint_t
_IO_va_list va_list or __gnuc_va_list
_IO_BUFSIZ BUFSIZ
_IO_cookie_io_functions_t cookie_io_functions_t
__io_read_fn cookie_read_function_t
__io_write_fn cookie_write_function_t
__io_seek_fn cookie_seek_function_t
__io_close_fn cookie_close_function_t
I used __fpos_t and __fpos64_t instead of fpos_t and fpos64_t because
the definitions of fpos_t and fpos64_t depend on the largefile mode.
I used __ssize_t and __gnuc_va_list in a handful of headers where
namespace cleanliness might be relevant even though they're
internal-use-only. In all other cases, I used the public-namespace
name.
There are a tiny handful of places where I left a use of 'struct _IO_FILE'
alone, because it was being used together with 'struct _IO_FILE_plus'
or 'struct _IO_FILE_complete' in the same arithmetic expression.
Because this patch was almost entirely done with search and replace, I
may have introduced indentation botches. I did proofread the diff,
but I may have missed something.
The ChangeLog below calls out all of the places where this was not a
pure search-and-replace change.
Installed stripped libraries and executables are unchanged by this patch,
except that some assertions in vfscanf.c change line numbers.
* libio/libio.h (_IO_FILE): Delete; all uses changed to FILE.
(_IO_fpos_t): Delete; all uses changed to __fpos_t.
(_IO_fpos64_t): Delete; all uses changed to __fpos64_t.
(_IO_size_t): Delete; all uses changed to size_t.
(_IO_ssize_t): Delete; all uses changed to ssize_t or __ssize_t.
(_IO_off_t): Delete; all uses changed to off_t.
(_IO_off64_t): Delete; all uses changed to off64_t.
(_IO_pid_t): Delete; all uses changed to pid_t.
(_IO_uid_t): Delete; all uses changed to uid_t.
(_IO_wint_t): Delete; all uses changed to wint_t.
(_IO_va_list): Delete; all uses changed to va_list or __gnuc_va_list.
(_IO_BUFSIZ): Delete; all uses changed to BUFSIZ.
(_IO_cookie_io_functions_t): Delete; all uses changed to
cookie_io_functions_t.
(__io_read_fn): Delete; all uses changed to cookie_read_function_t.
(__io_write_fn): Delete; all uses changed to cookie_write_function_t.
(__io_seek_fn): Delete; all uses changed to cookie_seek_function_t.
(__io_close_fn): Delete: all uses changed to cookie_close_function_t.
* libio/iofopncook.c: Remove unnecessary forward declarations.
* libio/iolibio.h: Correct outdated commentary.
* malloc/malloc.c (__malloc_stats): Remove unnecessary casts.
* stdio-common/fxprintf.c (__fxprintf_nocancel):
Remove unnecessary casts.
* stdio-common/getline.c: Use _IO_getdelim directly.
Don't redefine ssize_t.
* stdio-common/printf_fp.c, stdio_common/printf_fphex.c
* stdio-common/printf_size.c: Don't redefine size_t or FILE.
Remove outdated comments.
* stdio-common/vfscanf.c: Don't redefine va_list.
|
|
Nearly everything in _G_config.h is either junk or more appropriately
defined elsewhere:
* _G_fpos_t, _G_fpos64_t, and _G_BUFSIZ are already completely unused.
* All remaining uses of _G_va_list have been changed to __gnuc_va_list.
* The definition of _G_HAVE_ST_BLKSIZE/_IO_HAVE_ST_BLKSIZE has
been inlined into its sole use.
* The complete definition of _G_iconv_t has been moved to libio.h and
renamed _IO_iconv_t (all actual users used that name).
* _G_IO_IO_FILE_VERSION is vestigial; some code cares whether
_IO_stdin_used exists, but nothing looks at its value. I've
preserved the value as a hardwired constant in csu/init.c.
This means csu/init.c no longer needs to include anything.
* Many of the headers included by _G_config.h were already being
included directly by either either libio.h or stdio.h; the
remaining ones were moved to libio.h.
* _G_HAVE_MREMAP is still relevant, because mremap genuinely is a
Linux extension; it's not in POSIX and as far as I can tell it's
not available on the Hurd either. I also preserved _G_HAVE_MMAP,
since it's conceivable someone would want to port glibc to a
MMU-less, mmap-less environment in the future. Both are now always
defined to 1/0 as is the current convention, instead of the older
1/undef convention. These are the only symbols still defined in
_G_config.h.
* The actual inclusion of _G_config.h moves from libio.h to libioP.h,
as this is where a potential override of _G_HAVE_MMAP happens.
* The #ifdef logic in libioP.h controlling _IO_JUMPS_OFFSET has been
simplified.
After this patch, the only surviving _G_ symbols are the struct tag
names _G_fpos_t and _G_fpos64_t, which are preserved for the sake of
C++ mangled names in applications, and _G_HAVE_MMAP and _G_HAVE_MREMAP,
which do not seem worth renaming.
Installed stripped libraries are unchanged by this patch.
* bits/_G_config.h: Move back to sysdeps/generic/_G_config.h.
Delete all contents except for definitions of _G_HAVE_MMAP and
_G_HAVE_MREMAP. Add commentary explaining those two symbols.
* sysdeps/unix/sysv/linux/bits/_G_config.h: Move back to
sysdeps/unix/sysv/linux/_G_config.h. Make same content
change as above.
* libio/libio.h: Don't include bits/_G_config.h here.
Include stddef.h with __need_wchar_t defined. Include
bits/types/__mbstate_t.h, bits/types/wint_t.h, and gconv.h.
Define _IO_iconv_t here, directly.
Don't define _IO_HAVE_ST_BLKSIZE.
* libio/libioP.h: Include _G_config.h here. Move include of
shlib-compat.h up with rest of includes. Simplify conditionals
controlling definition of _IO_JUMPS_OFFSET.
* csu/init.c: Remove always-true #if around entire file.
Don't include stdio.h. Set _IO_stdin_used to hardwired
constant 0x20001, and update commentary.
* include/stdio.h, sysdeps/ieee754/ldbl-opt/nldbl-compat.h:
Replace all uses of _G_va_list with __gnuc_va_list.
* libio/filedoalloc.c: Use #if defined _STATBUF_ST_BLKSIZE
instead of #if _IO_HAVE_ST_BLKSIZE.
* libio/fileops.c: Test _G_HAVE_MREMAP with #if, not #ifdef.
* libio/iofdopen.c, libio/iofopen.c: Test _G_HAVE_MMAP with #if,
not #ifdef.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
Some libio operations fail to correctly free the backup area (created
by _IO_{w}default_pbackfail on unget{w}c) resulting in either invalid
buffer free operations or memory leaks.
For instance, on the example provided by BZ#22415 a following
fputc after a fseek to rewind the stream issues an invalid free on
the buffer. It is because although _IO_file_overflow correctly
(from fputc) correctly calls _IO_free_backup_area, the
_IO_new_file_seekoff (called by fseek) updates the FILE internal
pointers without first free the backup area (resulting in invalid
values in the internal pointers).
The wide version also shows an issue, but instead of accessing invalid
pointers it leaks the backup memory on fseek/fputwc operation.
Checked on x86_64-linux-gnu and i686-linux-gnu.
* libio/Makefile (tests): Add tst-bz22415.
(tst-bz22415-ENV): New rule.
(generated): Add tst-bz22415.mtrace and tst-bz22415.check.
(tests-special): Add tst-bz22415-mem.out.
($(objpfx)tst-bz22415-mem.out): New rule.
* libio/fileops.c (_IO_new_file_seekoff): Call _IO_free_backup_area
in case of a successful seek operation.
* libio/wfileops.c (_IO_wfile_seekoff): Likewise.
(_IO_wfile_overflow): Call _IO_free_wbackup_area in case a write
buffer is required.
* libio/tst-bz22415.c: New test.
|
|
Do not define _POSIX_SOURCE.
|
|
This patch consolidates all the non cancellable close calls to use
the __close_nocancel{_nostatus} identifier. For non cancellable targets
it will be just a macro to call the default respective symbol while on Linux
will be a internal one.
Also, since it is used on libcrypto it is also exported in GLIBC_PRIVATE
namespace.
Checked on x86_64-linux-gnu, x86_64-linux-gnu-x32, and i686-linux-gnu.
* sysdeps/generic/not-cancel.h (close_not_cancel): Remove macro.
(close_not_cancel_no_status): Likewise.
(__close_nocancel): New macro.
(__close_nocancel_no_status): Likewise.
* sysdeps/unix/sysv/linux/not-cancel.h (__close_nocancel): Remove
macro.
(close_not_cancel): Likewise.
(close_not_cancel_no_status): Likewise.
(__close_nocancel): New prototype.
(__close_nocancel_no_status): New function.
* sysdeps/unix/sysv/linux/close.c (__close_nocancel): New function.
* catgets/open_catalog.c (__open_catalog): Replace
close_not_cancel{_no_status) with __close_nocancel{_nostatus}.
* gmon/gmon.c (write_gmon): Likewise.
* iconv/gconv_cache.c (__gconv_load_cache): Likewise.
* intl/loadmsgcat.c (close): Likewise.
* io/ftw.c (open_dir_stream): Likewise.
(ftw_startup): Likewise.
* libio/fileops.c (_IO_file_open): Likewise.
(_IO_fi |
