| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The <termio.h> interface is absolutely ancient: it was obsoleted by
<termios.h> already in the first version of POSIX (1988) and thus
predates the very first version of Linux. Unfortunately, some constant
macros are used both by <termio.h> and <termios.h>; particularly
problematic is the baud rate constants since the termio interface
*requires* that the baud rate is set via an enumeration as part of
c_cflag.
In preparation of revamping the termios interface to support the
arbitrary baud rate capability that the Linux kernel has supported
since 2008, remove <termio.h> in the hope that no one still uses this
archaic interface.
Note that there is no actual code in glibc to support termio: it is
purely an unabstracted ioctl() interface.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
"Recent" GCC versions (since commit fc62716fe8d1, backported to stable
branches) emit a vzeroupper instruction at the end of functions
containing AVX instructions. This causes the tst-audit10 test to fail
on CPUs lacking AVX instructions, despite the AVX512F check. The crash
occurs in the pltenter function of tst-auditmod10b.c.
Fix that by moving the code guarded by the check_avx512 function into
specific functions using the target ("avx512f") attribute. Note that
since commit 5359c3bc91cc ("x86-64: Remove compiler -mavx512f check") it
is safe to assume that the compiler has AVX512F support, thus the
__AVX512F__ checks can be dropped.
Tested on non-AVX, AVX2 and AVX512F machines.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
Linux 6.12 adds AT_RENAME_* aliases for RENAME_* flags for renameat2,
and also AT_HANDLE_MNT_ID_UNIQUE. Add the first set of aliases to
stdio.h alongside the RENAME_* names, and AT_HANDLE_MNT_ID_UNIQUE to
bits/fcntl-linux.h.
Tested for x86_64.
|
|
8ef17919509e ("hurd: Fix EINVAL error on linking to a slash-trailing path
[BZ #32569]) made symlink return ENOTDIR, but the gnulib testsuite does
not recognize it for such a situation, and EEXIST is indeed more
comprehensible to users.
|
|
This avoids SIGFPE handlers (or code longjmp-ed to) getting disturbed by the
exception that generated it.
Note: gcc's unwinding depends on the rpc_wait_trampoline/trampoline exact
code, so we here avoid breaking it.
|
|
If __thread_get_state failed, there is no xstate level to check.
ok is 0 already and the memory exists, but better not read uninitialized
memory.
|
|
If the process has never used fp before getting a signal, xstate is set
(and thus the x87 state is not initialized) but xstate->initialized is still
0, and we should not restore anything.
|
|
|
|
* hurd/Makefile: add new tests
* hurd/test-sig-rpc-interrupted.c: check xstate save and restore in
the case where a signal is delivered to a thread which is waiting
for an rpc. This test implements the rpc interruption protocol used
by the hurd servers. It was so far passing on Debian thanks to the
local-intr-msg-clobber.diff patch, which is now obsolete.
* hurd/test-sig-xstate.c: check xstate save and restore in the case
where a signal is delivered to a running thread, making sure that
the xstate is modified in the signal handler.
* hurd/test-xstate.h: add helpers to test xstate
* sysdeps/mach/hurd/i386/bits/sigcontext.h: add xstate to the
sigcontext structure.
+ sysdeps/mach/hurd/i386/sigreturn.c: restore xstate from the saved
context
* sysdeps/mach/hurd/x86/trampoline.c: save xstate if
supported. Otherwise we fall back to the previous behaviour of
ignoring xstate.
* sysdeps/mach/hurd/x86_64/bits/sigcontext.h: add xstate to the
sigcontext structure.
* sysdeps/mach/hurd/x86_64/sigreturn.c: restore xstate from the saved
context
Signed-off-by: Luca Dariz <luca@orpolo.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250319171118.142163-1-luca@orpolo.org>
|
|
Message-ID: <20250310084409.24177-1-zhmingluo@163.com>
|
|
I misunderstood the recommendation from the hardware team about non-temporal
load/stores. It is still recommended to use them in memset for large sizes. It
was not recommended for their use with device memory and memset is already
not valid to be used with device memory.
This reverts commit e6590f0c86632c36c9a784cf96075f4be2e920d2.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
I misunderstood the recommendation from the hardware team about non-temporal
load/stores. It is still recommended to use them in memcpy for large sizes. It
was not recommended for their use with device memory and memcpy is already
not valid to be use with device memory.
This reverts commit eb5eeb47403e0a91de834868e501b4d62b8d2cb9.
Signed-off-by: Andrew Pinski <quic_apinski@quicinc.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
There is a spelling mistake in a puts statement. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Detect Intel Diamond Rapids and tune it similar to Intel Granite Rapids.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
|
|
Enable default tuning for unknown Intel processor.
Tested on x86, no regression.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
- Add ARROWLAKE model detection.
- Add PANTHERLAKE model detection.
- Add CLEARWATERFOREST model detection.
Intel® Architecture Instruction Set Extensions Programming Reference
https://cdrdv2.intel.com/v1/dl/getContent/671368 Section 1.2.
No regression, validated model detection on SDE.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
This is only needed for -mno-secure-plt, and this linkage mode
is not supported with powerpc64 and powerp64le.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
|
|
As mentioned by the reporter in a pull request against gcc-mirror,
the THREEp96 constant in e_expl.c is incorrect, it is actually 0x3.p+94f128
rather than 0x3.p+96f128.
The algorithm uses that to compute the t2 integer (tval2), by whose
delta it adjusts the x+xl pair and then in the result uses the precomputed
exp value for that entry.
Using 0x3.p+94f128 rather than 0x3.p+96f128 results in tval2 sometimes
being one smaller, sometimes one larger than the desired value, thus can mean
the x+xl pair after adjustment will be larger in absolute value than it
should be.
DesWursters created a test program for this
https://github.com/DesWurstes/comparefloats
and his results were
total: 1135000000 not_equal: 4322 earlier_score: 674 later_score: 3648
I've modified this so with
https://sourceware.org/bugzilla/show_bug.cgi?id=32411#c3
so that it actually tests pseudo-random _Float128 values with range
(-16384.,16384) with strong bias on values larger than 0.0002 in absolute
value (so that tval1/tval2 aren't zero most of the time) and that gave
total: 10000000000 not_equal: 29861 earlier_score: 4606 later_score: 25255
So, in both cases, in most cases the change doesn't result in any differences,
and in those rare cases where does, about 85% have smaller ulp than without
the patch.
Additionally I've tried
https://sourceware.org/bugzilla/show_bug.cgi?id=32411#c4
and in 2 billion iterations it didn't find any case where x+xl after the
adjustments without this change would be smaller in absolute value compared
to x+xl after the adjustments with this change.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
From the bug report [1], multiple programs still require to dlopen
shared libraries with either missing PT_GNU_STACK or with the executable
bit set. Although, in some cases, it seems to be a hard-craft assembly
source without the required .note.GNU-stack marking (so the static linker
is forced to set the stack executable if the ABI requires it), other
cases seem that the library uses trampolines [2].
Unfortunately, READ_IMPLIES_EXEC is not an option since on some ABIs
(x86_64), the kernel clears the bit, making it unsupported. To avoid
reinstating the broken code that changes stack permission on dlopen
(0ca8785a28), this patch extends the glibc.rtld.execstack tunable to
allow an option to force an executable stack at the program startup.
The tunable is a security issue because it defeats the PT_GNU_STACK
hardening. It has the slight advantage of making it explicit by the
caller, and, as for other tunables, this is disabled for setuid binaries.
A tunable also allows us to eventually remove it, but from previous
experiences, it would require some time.
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=32653
[2] https://github.com/conda-forge/ctng-compiler-activation-feedstock/issues/143
Reviewed-by: Sam James <sam@gentoo.org>
|
|
C2Y adds unsigned versions of the abs functions (see C2Y draft N3467 and
proposal N3349).
Tested for x86_64.
Signed-off-by: Lenard Mollenkopf <glibc@lenardmollenkopf.de>
|
|
Scan xstate IDs up to the maximum supported xstate ID. Remove the
separate AMX xstate calculation. Instead, exclude the AMX space from
the start of TILECFG to the end of TILEDATA in xsave_state_size.
Completed validation on SKL/SKX/SPR/SDE and compared xsave state size
with "ld.so --list-diagnostics" option, no regression.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
|
|
If the input buffer exceeds the stack auxiliary buffer, qsort will
malloc a temporary one to call mergesort. Since C++ standard does
allow the callback comparison function to throw [1], the glibc
implementation can potentially leak memory.
The fixes uses a pthread_cleanup_combined_push and
pthread_cleanup_combined_pop, so it can work with and without
exception enables. The qsort code path that calls malloc now
requires some extra setup and a call to __pthread_cleanup_push
anmd __pthread_cleanup_pop (which should be ok since they just
setup some buffer state).
Checked on x86_64-linux-gnu.
[1] https://timsong-cpp.github.io/cppwp/n4950/alg.c.library#4
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
We mistakenly dropped the check in 27b96e069aad17cefea9437542180bff448ac3a0;
there's some other checks which we *can* drop, but let's worry about that
later.
Fixes the build on ppc64le where GCC is configured with --with-long-double-format=ieee.
Reviewed-by: Andreas Schwab <schwab@suse.de>
|
|
Linux 6.14 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.14.
Tested with build-many-glibcs.py.
|
|
This fixes a test build failure on Hurd.
Fixes commit 145097dff170507fe73190e8e41194f5b5f7e6bf ("x86: Use separate
variable for TLSDESC XSAVE/XSAVEC state size (bug 32810)").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
For all Linux distros with glibc 2.40 which I can find, GCC 14.2 is used
to compile glibc 2.40:
OS GCC URL
AOSC 14.2.0 https://aosc.io/
Arch Linux 14.2.0 https://archlinux.org/
ArchPOWER 14.2.0 https://archlinuxpower.org/
Artix 14.2.0 https://artixlinux.org/
Debian 14.2.0 https://www.debian.org/
Devuan 14.2.0 https://www.devuan.org/
Exherbo 14.2.0 https://www.exherbolinux.org/
Fedora 14.2.1 https://fedoraproject.org/
Gentoo 14.2.1 https://gentoo.org/
Kali Linux 14.2.0 https://www.kali.org/
KaOS 14.2.0 https://kaosx.us/
LiGurOS 14.2.0 https://liguros.gitlab.io/
Mageia 14.2.0 https://www.mageia.org/en/
Manjaro 14.2.0 https://manjaro.org/
NixOS 14.2.0 https://nixos.org/
openmamba 14.2.0 https://openmamba.org/
OpenMandriva 14.2.0 https://openmandriva.org/
openSUSE 14.2.0 https://www.opensuse.org/
Parabola 14.2.0 https://www.parabola.nu/
PLD Linux 14.2.0 https://pld-linux.org/
PureOS 14.2.0 https://pureos.net/
Raspbian 14.2.0 http://raspbian.org/
Slackware 14.2.0 http://www.slackware.com/
Solus 14.2.0 https://getsol.us/
T2 SDE 14.2.0 http://t2sde.org/
Ubuntu 14.2.0 https://www.ubuntu.com/
Wikidata 14.2.0 https://wikidata.org/
Support older versions of GCC to build glibc 2.42:
1. Need to work around bugs in older versions of GCC.
2. Can't use the new features in newer versions of GCC, which may be
required for new features, like _Float16 which requires GCC 12.1 or
above, in glibc,
The main benefit of supporting older versions of GCC is easier backport
of bug fixes to the older releases of glibc, which can be mitigated by
avoiding incompatible features in newer versions of GCC for critical bug
fixes. Require GCC 12.1 or newer to build. Remove GCC version check for
PowerPC and s390x.
TEST_CC and TEST_CXX can be used to test the glibc build with the older
versions of GCC.
For glibc developers who are using Linux OSes which don't come with GCC
12.1 or newer, they should build and install GCC 12.1 or newer to work
on glibc.
This fixes BZ #32539.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sam James <sam@gentoo.org>
|
|
|
|
When libgcc is built with pac-ret, it requires to autenticate the
unwinding frame based on CFI information. The _dl_tlsdesc_dynamic
uses a custom calling convention, where it is responsible to save
and restore all registers it might use (even volatile).
The pac-ret support added by 1be3d6eb823d8b952fa54b7bbc90cbecb8981380
was added only on the slow-path, but the fast path also adds DWARF
Register Rule Instruction (cfi_adjust_cfa_offset) since it requires
to save/restore some auxiliary register. It seems that this is not
fully supported neither by libgcc nor AArch64 ABI [1].
Instead, move paciasp/autiasp to function prologue/epilogue to be
used on both fast and slow paths.
I also corrected the _dl_tlsdesc_dynamic comment description, it was
copied from i386 implementation without any adjustment.
Checked on aarch64-linux-gnu with a toolchain built with
--enable-standard-branch-protection on a system with pac-ret
support.
[1] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst#id1
Reviewed-by: Yury Khrustalev <yury.khrustalev@arm.com>
|
|
Previously, the initialization code reused the xsave_state_full_size
member of struct cpu_features for the TLSDESC state size. However,
the tunable processing code assumes that this member has the
original XSAVE (non-compact) state size, so that it can use its
value if XSAVEC is disabled via tunable.
This change uses a separate variable and not a struct member because
the value is only needed in ld.so and the static libc, but not in
libc.so. As a result, struct cpu_features layout does not change,
helping a future backport of this change.
Fixes commit 9b7091415af47082664717210ac49d51551456ab ("x86-64:
Update _dl_tlsdesc_dynamic to preserve AMX registers").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
If we have to use XSAVE or XSAVEC trampolines, do not adjust the size
information they need. Technically, it is an operator error to try to
run with -XSAVE,-XSAVEC on such builds, but this change here disables
some unnecessary code with higher ISA levels and simplifies testing.
Related to commit befe2d3c4dec8be2cdd01a47132e47bdb7020922
("x86-64: Don't use SSE resolvers for ISA level 3 or above").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Reject invalid formatted scanf real input data the exponent part of
which is comprised of an exponent introducing character, optionally
followed by a sign, and with no actual digits following. Such data is a
prefix of, but not a matching input sequence and it is required by ISO C
to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result according to the input significand read and the
exponent of zero, with the significand and the exponent part wholly
consumed from input.
Correct an invalid `tstscanf.c' test accordingly that expects a matching
success for input data provided in the ISO C standard as an example for
a matching failure.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Reject invalid formatted scanf real input data that is comprised of a
hexadecimal prefix, optionally preceded by a sign, and with no actual
digits following owing to the field width restriction in effect. Such
data is a prefix of, but not a matching input sequence and it is
required by ISO C to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result of zero, with the prefix wholly consumed from
input. Where the end of input is marked by the end-of-file condition
rather than the field width restriction in effect a matching failure is
already correctly produced.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Reject invalid formatted scanf integer input data that is comprised of a
binary or hexadecimal prefix, optionally preceded by a sign, and with no
actual digits following. Such data is a prefix of, but not a matching
input sequence and it is required by ISO C to cause a matching failure.
Currently a matching success is instead incorrectly produced along with
the conversion result of zero, with the prefix wholly consumed from
input.
Enable input data that causes test failures without this fix in place.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure, a format-specific test skeleton providing a
data comparison implementation that ignores bits of data representation
in memory that do not participate in holding floating-point data, and
`long double' real input data for targets using the Intel/Motorola
80-bit format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the pown functions, which are like pow but with an
integer exponent. That exponent has type long long int in C23; it was
intmax_t in TS 18661-4, and as with other interfaces changed after
their initial appearance in the TS, I don't think we need to support
the original version of the interface. The test inputs are based on
the subset of test inputs for pow that use integer exponents that fit
in long long.
As the first such template implementation that saves and restores the
rounding mode internally (to avoid possible issues with directed
rounding and intermediate overflows or underflows in the wrong
rounding mode), support also needed to be added for using
SET_RESTORE_ROUND* in such template function implementations. This
required math-type-macros-float128.h to include <fenv_private.h>, so
it can tell whether SET_RESTORE_ROUNDF128 is defined. In turn, the
include order with <fenv_private.h> included before <math_private.h>
broke loongarch builds, showing up that
sysdeps/loongarch/math_private.h is really a fenv_private.h file
(maybe implemented internally before the consistent split of those
headers in 2018?) and needed to be renamed to fenv_private.h to avoid
errors with duplicate macro definitions if <math_private.h> is
included after <fenv_private.h>.
The underlying implementation uses __ieee754_pow functions (called
more than once in some cases, where the exponent does not fit in the
floating type). I expect a custom implementation for a given format,
that only handles integer exponents but handles larger exponents
directly, could be faster and more accurate in some cases.
I encourage searching for worst cases for ulps error for these
implementations (necessarily non-exhaustively, given the size of the
input space).
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
Using gcc -Wshift-overflow=2 -Wsystem-headers to compile a file
including <sys/mount.h> will cause a warning since 1 << 31 is undefined
behavior on platforms where int is 32-bits.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Add Makefile infrastructure and IBM 128-bit 'long double' real input for
targets switching between the IEEE 754 binary128 and IBM 128-bit formats
with '-mabi=ieeelongdouble' and '-mabi=ibmlongdouble'. Reuse IEEE 754
binary128 input data but with modified output file names so as not to
clash with the names used for IBM 128-bit format tests made with common
rules for the 'long double' data type.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure and 64-bit `long double' real input data for
targets switching between the IEEE 754 binary64 and IEEE 754 binary128
formats with `-mlong-double-64' and `-mlong-double-128'. Use modified
output file names for the IEEE 754 binary64 format so as not to clash
with the names used for IEEE 754 binary128 format tests made with common
rules for the 'long double' data type.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure and `long double' real input data for
targets using the IEEE 754 binary128 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure and `double' real input data for targets
using the IEEE 754 binary64 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure and `float' real input data for targets
using the IEEE 754 binary32 format.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0e', '0e+',
'0x', '0x8p', '0x0p-', etc.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
|
Add Makefile infrastructure and `int' and `long' integer input data,
signed and unsigned, for LP64 targets.
While the size of `int' data is the same between ILP32 and LP64 targets,
resulting scanf output is different between them for out of range input
data and while ISO C and POSIX both say that the behavior is undefined
if the result of the conversion cannot be represented we want to keep
track of our output to prevent inadvertent changes. Hence the use of
distinct `int' integer input data between ILP32 and LP64 targets.
Keep input data disabled and referring to BZ #12701 for entries that are
are currently incorrectly accepted as valid data, such as '0b' or '0x'.
Reviewed-by: Joseph Myers <josmyers@redhat.com>
|
